位置：成果数据库 > 期刊 > 期刊详情页
Dependency of microhardness on solidification processing parameters and microstructure characteristi
  • 期刊名称：Journal of Alloys and Compounds
  • 时间：0
  • 页码：60-64
  • 语言：英文
  • 相关项目：Ti-Al包晶合金定向凝固初始过渡区内相选择规律研究
作者： 李新中|
同期刊论文项目
Ti-Al包晶合金定向凝固初始过渡区内相选择规律研究
期刊论文 28
同项目期刊论文
Preparation oftheinitialsolid–liquidinterfaceandmeltindirectional solidificationofAl–18a
Phase-field simulation of lamellar growth for a binary eutectic alloy. LI Xin-zhong(李新中)1, 2, LIU Do
The microstructure parameters and microhardness of directionally solidified Ti–43Al–3Si
Influence ofthermalstabilizationonthesoluteconcentrationofthemeltin directional solidification. Dong
Effect of growth rate on microstructure parameters and microhardness in directionally solidified Ti&
Improvement of microstructure and mechanical properties adding Mg3Zn6Y icosahedral phase alloy. Huij
Dependency of microstructure parameters and microhardness on the temperature gradient for directiona
Microstructure evolution in directionally solidified Tie(50, 52) at%Al alloys. Dongmei Liu, Xinzhong
Numerical computations for temperature, fraction of solid phase and composition couplings in ternary
Directional solidification of Ti–49 at.%Al alloy. Jianglei Fan , Xinzhong Li, Yanqing Su , Rui
Directional solidification of Cu–20Sn alloy at low speed: From peritectic coupled growth to ba
MicrostructureevolutionofdirectionallysolidifiedTi–46Al–0.5W–0.5Sialloy Jianglei F
An analysisofnon-equilibriumperitecticreactiondrivenbysolutediffusion under atemperaturegradient Don
定向凝固Ti-50Al合金组织演化及片层取向控制。李新中，孙涛，彭鹏，苏彦庆，郭景杰，傅恒志
定向凝固Ti-43Al-3Si合金的组织演化规律：I 初始过渡区组织演化规律。 李新中，樊江磊，苏彦庆，郭景杰，傅恒志
定向凝固Ti-(44-54)at%Al合金凝固相的选择。李新中，孙涛，于彩霞，苏彦庆，郭景杰，傅恒志
定向凝固Ti-43Al-3Si合金的组织演化规律，II 稳态组织生长规律 李新中，樊江磊，苏彦庆，郭景杰，傅恒志
Microstructure evolution of directionally solidified Al-25at.%Ni peritectic alloy。Su Yanqing a, Liu
定向凝固Ti-50Al合金组织演化及其片层取向控制
定向凝固Ti-（44％-54％）Al合金的凝固相选择
Thermo-Calc based multi-component micro-segregation model and solidification paths calculations
Phase-field simulation of lamellar growth for a binary eutectic alloy
定向凝固Ti—43Al—3Si合金的组织演化规律 Ⅱ.稳态生长区组织演化规律
定向凝固Ti—43Al—3Si合金的组织演化规律Ⅰ.初始过渡区组织演化规律
基于Thermo-Calc及T-f_S-C_L耦合方法预测Biot≤0.1的合金凝固路径（英文）
热处理对不同冷速Al合金共晶相形貌及含量的影响
熔体热稳定处理对定向凝固Ti-46Al-0.5W-0.5Si合金组织和性能的影响