位置：成果数据库 > 期刊 > 期刊详情页
Improvement of microstructure and mechanical properties adding Mg3Zn6Y icosahedral phase alloy. Huij
  • 期刊名称：Materials Science and Engineering A
  • 时间：0
  • 页码：5585-5591
  • 语言：英文
  • 相关项目：Ti-Al包晶合金定向凝固初始过渡区内相选择规律研究
作者： 李新中|
同期刊论文项目
Ti-Al包晶合金定向凝固初始过渡区内相选择规律研究
期刊论文 28
同项目期刊论文
Preparation oftheinitialsolid–liquidinterfaceandmeltindirectional solidificationofAl–18a
Phase-field simulation of lamellar growth for a binary eutectic alloy. LI Xin-zhong(李新中)1, 2, LIU Do
Dependency of microhardness on solidification processing parameters and microstructure characteristi
The microstructure parameters and microhardness of directionally solidified Ti–43Al–3Si
Influence ofthermalstabilizationonthesoluteconcentrationofthemeltin directional solidification. Dong
Effect of growth rate on microstructure parameters and microhardness in directionally solidified Ti&
Dependency of microstructure parameters and microhardness on the temperature gradient for directiona
Microstructure evolution in directionally solidified Tie(50, 52) at%Al alloys. Dongmei Liu, Xinzhong
Numerical computations for temperature, fraction of solid phase and composition couplings in ternary
Directional solidification of Ti–49 at.%Al alloy. Jianglei Fan , Xinzhong Li, Yanqing Su , Rui
Directional solidification of Cu–20Sn alloy at low speed: From peritectic coupled growth to ba
MicrostructureevolutionofdirectionallysolidifiedTi–46Al–0.5W–0.5Sialloy Jianglei F
An analysisofnon-equilibriumperitecticreactiondrivenbysolutediffusion under atemperaturegradient Don
定向凝固Ti-50Al合金组织演化及片层取向控制。李新中，孙涛，彭鹏，苏彦庆，郭景杰，傅恒志
定向凝固Ti-43Al-3Si合金的组织演化规律：I 初始过渡区组织演化规律。 李新中，樊江磊，苏彦庆，郭景杰，傅恒志
定向凝固Ti-(44-54)at%Al合金凝固相的选择。李新中，孙涛，于彩霞，苏彦庆，郭景杰，傅恒志
定向凝固Ti-43Al-3Si合金的组织演化规律，II 稳态组织生长规律 李新中，樊江磊，苏彦庆，郭景杰，傅恒志
Microstructure evolution of directionally solidified Al-25at.%Ni peritectic alloy。Su Yanqing a, Liu
定向凝固Ti-50Al合金组织演化及其片层取向控制
定向凝固Ti-（44％-54％）Al合金的凝固相选择
Thermo-Calc based multi-component micro-segregation model and solidification paths calculations
Phase-field simulation of lamellar growth for a binary eutectic alloy
定向凝固Ti—43Al—3Si合金的组织演化规律 Ⅱ.稳态生长区组织演化规律
定向凝固Ti—43Al—3Si合金的组织演化规律Ⅰ.初始过渡区组织演化规律
基于Thermo-Calc及T-f_S-C_L耦合方法预测Biot≤0.1的合金凝固路径（英文）
热处理对不同冷速Al合金共晶相形貌及含量的影响
熔体热稳定处理对定向凝固Ti-46Al-0.5W-0.5Si合金组织和性能的影响