位置：成果数据库 > 期刊 > 期刊详情页
New method for analyzing recrystallization kinetics of deformed metal by differential scanning calor
  • 期刊名称：J. Cent. South Univ.
  • 时间：2015
  • 页码：849-854
  • 相关项目：不同层错能FCC单晶冷拔形变组织和织构的取向效应
作者： Li Jun|Yao Yu-hong|Yan Wen|Fan Xin-hui|
同期刊论文项目
不同层错能FCC单晶冷拔形变组织和织构的取向效应
期刊论文 24 获奖 3
同项目期刊论文
A simple method for analyzing recrystallization kinetics of deformed metal by DSC
Ｚｒ含量对Ｍｇ－５Ｇｄ－３Ｙ－ｘＺｒ合金晶粒尺寸及固溶行为的影响
银试样的电解液制备及工艺参数优化
确定取向铝单晶制备工艺的研究
Annealing strengthening of pre-deformed Mg–10Gd–3Y–0.3Zr alloy
Formation of High-Angle Dislocation Boundaries in Drawn Single Crystal Copper Wires
Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix
细铜丝电子背散射衍射试样的制备
Evolution of microstructure and texture of cold-drawn polycrystalline Ag with low stacking fault ene
Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy
温度对纯铜等通道挤压变形组织的影响
高熵合金Al5Co22.5Cu25Mn22.5Ni25微观组织与力学性能研究
退火处理对AZ31镁合金退孪晶的影响
固溶处理对Mg-xGd-0.3Zr合金微观组织及力学性能的影响
冷拔铝线材显微组织和织构演变的温度相关性
<110>取向银单晶宏/微观裂化及界面失配角分布
New method for analyzing recrystallization kinetics of deformed metal by differential scanning calorimeter
Effect of Transverse Grain Boundary on Microstructure, Texture and Mechanical Properties of Drawn Copper Wires