位置：成果数据库 > 期刊 > 期刊详情页
Microstructure simulation on recrystallization of an as-cast nickel based single crystal superalloy
  • ISSN号：0927-0256
  • 期刊名称：Computational Materials Science
  • 时间：2015.6.11
  • 页码：122-133
  • 相关项目：定向凝固单晶涡轮叶片的再结晶数值模拟
作者： Li, Zhonglin|Xu, Qingyan|Liu, Baicheng|
同期刊论文项目
定向凝固单晶涡轮叶片的再结晶数值模拟
期刊论文 54 会议论文 24 著作 1
同项目期刊论文
调节片熔模铸造过程的应力数值模拟
不同择优生长取向角枝晶生长的数值模拟
考虑包晶相的Ti-Al合金定向凝固枝晶生长数值模拟
NUMERICAL SIMULATION OF RECRYSTALLIZATION PROCESS OF NICKEL BASE SINGLE CRYSTAL SUPERALLOY
基于ProCAST的大型复杂空心叶片精铸的数值模拟
单晶高温合金螺旋选晶过程的数值模拟与实验研究一: 引晶段.
单晶高温合金螺旋选晶过程的数值模拟与实验研究二：螺旋段
定向凝固共晶生长的元胞自动机数值模拟
Simulation and experimental validation of three-dimensional dendrite growth
重型燃气轮机叶片熔模铸造凝固过程数值模拟
A Modified Cellular Automaton Model for the Quantitative Prediction of Equiaxed and Columnar Dendrit
Progress on modeling and simulation of directional solidification of superalloy turbine blade castin
Numerical Simulation of 3-D Dendritic Growth under Forced Convection Using the Modified Cellular Aut
宽弦航空叶片Bridgeman定向凝固组织数值模拟
镍基高温合金铸件液态金属冷却定向凝固建模仿真及工艺规律研究
K4169高温合金机匣热控凝固工艺的数值模拟及优化
单晶导向叶片凝固过程组织模拟
高温合金单晶叶片定向凝固过程的宏微观数值模拟
Numerical Simulation and Optimization of Directional Solidification Process of Single Crystal Supera
镍基单晶高温合金再结晶过程模拟研究
Influence of deformation temperature on recrystallization in a Ni-based single crystal superalloy
Multiscale modelling and simulation of single crystal superalloy turbine blade casting during direct
Simulation and experiments on plasticity and recrystallisation in SX superalloys by investment casti
Deformation and recrystallization of single crystal nickel-based superalloys during investment casti
基于元胞自动机方法的定向凝固枝晶竞争生长数值模拟
空心叶片LMC定向凝固温度场和微观组织模拟
DD6高温合金定向凝固枝晶生长的数值模拟研究
NumericalSimulation of Directionally SolidifiedIndustrial Gas Turbine Hollow Blades by Liquid Metal
Experimental Investigation on Recrystallization Mechanism of aNi-base Single Crystal Superalloy.
Simulationand Experimental study of Recrystallization Kinetics of Nickel Based SingleCrystal Superal
Roleof as-cast dendritic microstructure in recrystallization of a Ni-based singlecrystal superalloy
DD6合金定向凝固选晶器的数值模拟与实验研究. 稀有金属材料与工程
液态金属冷却定向凝固铸件数值模拟与实验研究
基于ProCAST二次开发的叶片LMC凝固特征模拟
Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade Casting wi
Simulation of dendritic competitive growth during directional solidification using modified cellular
基于改进元胞自动机模型的三元合金枝晶生长的数值模拟
对流作用下枝晶形貌演化的数值模拟和实验研究
Al-7Si-0．36Mg合金定向凝固一次枝晶臂间距实验和模拟
Simulation of the Dendrite Morphology and Microsegregation in Solidification of Al-Cu-Mg Aluminum Alloys
Al-Mg-Si合金中针棒状析出相时效析出动力学及强化模拟研究
液态金属冷却定向凝固数值模拟与试验研究
Al-7Si-Mg铸造铝合金凝固和热处理过程微观组织模拟和屈服强度预测
Ti-6Al-4V合金熔模铸造过程中的固态相变微观组织演变的数值模拟
数值模拟技术在制备燃气轮机叶片中的应用
Numerical simulation on vacuum solution heat treatment and gas quenching process of a low rhenium-containing Ni-based single crystal turbine blade
Al-7Si-Mg铝合金拉伸过程应变硬化行为及力学性能模拟研究
Multiscale modelling and simulation of single crystal superalloy turbine blade casting during directional solidification process
Modeling of aluminum-silicon irregular eutectic growth by cellular automaton model