欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
通过口模旋转挤出制备3种管径聚乙烯(PE)管,系统研究其结构与性能。结果表明,相较于传统挤出PE管内串晶平行与轴向,旋转挤出过程中聚合物熔体的流动是轴向牵引流动和环向拖曳流动的叠加,其方向偏离轴向,可诱导串晶偏离轴向排列,从而提高PE管的环向取向度,实现PE管的环向增强,抑制裂纹在PE管内沿轴向扩展。随PE管管径的增加,在相同旋转角速度下环向流动线速度增大,串晶偏离轴向的夹角增加,环向取向度更高,因而旋转挤出制备的大口径PE管具有更优的性能。
同期刊论文项目
同项目期刊论文
The formation and evolution of the hierarchical structure of polyethylene pipe during extrusion proc
Control of rotation extrusion over shish-kebab crystal alignment in polyethylene pipe and its effect
Effect of the Mandrel Rotation Speed and Inner Wall Cooling Rate on the Performance and Structure of
In-situ microfibrillation of polystyrene(PS)/polybutene-1 (PB-1) composites prepared via melt drawin
Controllable reinforcement of stiffness and toughness of polypropylene via thermally induced self-as
Effect of Die Temperature on Morphology and Performance of Polyethylene Pipe Prepared via Mandrel Ro
Formation and Alignment of Hybrid Shish-Kebab Morphology with Rich Beta Crystals in an Isotactic Pol
Joint effects of rotational extrusion and TiO2 on performance and antimicrobial properties of extrud
Preparation of polypropylene/glass fiber composite with high performance through interfacial crystal
Control over β-form hybrid shish-kebab crystals in polypropylene pipe via coupled effect of self-ass
Biaxial reinforcements for polybutene-1 medical-tubes achieved via flow-design controlled morphologi
期刊信息
位置：