以多壁纳米碳管(MWCNTs)为电子媒介体和酶的吸附载体,利用层层累积的白组装技术固定葡萄糖氧化酶(GOx)的多层(MWCNTs/GOx)。复合薄膜修饰电极,制备了一种新型葡萄糖生物传感器。结果表明:传感器对葡萄糖的响应电流值随着MWCNTs/GOx复合薄膜层数的不同而变化,当MWCNTs/GOx复合薄膜的层数为6时,响应电流值达到最大。(MWCNTs/GOx)。复合薄膜修饰的葡萄糖生物传感器对3×10^-2moL/L葡萄糖的响应电流为1.63μA,响应时问仅为6.7s。该生物传感器检测的线性范围为5×10^-4~1.5×10^-2moL/L,最低检测浓度可达0.9×10^-4mol/L。
Take multi-walled carbon nanotubes (MWCNTs) as electronic intermedia and adsorptive carrier of enzyme, a layer-by-layer serf-assemble technique is used to immobilize glucose oxidase (GOx) and form (MWCNTs/GOx) n multilayer films to modify electrode, then a new kind of biosensor is prepared. Results show that the response current to glucose of biosensor is changed with different number of MWCNTs/GOx muhilayer films,and it reaches the maximum value when the number of MWCNTs/GOx layers is 6. The response current of the (MWCNTs/GOx)6 multilayer films-modified biosensor to 3 × 10^-2 mol/L glucose is 1.63 μA while the response time is only 6.7 s. The linear range of this biosensor is 5 × 10^-4 - 1.5 × 10^-2 mol/L and the lowest detectable concentration can even reach at 0.9 × 10^-4 mol/L.