欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
考虑流固耦合下重复压裂井周围注/采孔隙压力分布,建立重复压裂井周围孔隙压力诱导最大主应力和主应力方位角数学模型;考虑初次人工裂缝内充满弱可压缩流体,引入流体影响因子,建立初次人工裂缝诱导应力场模型;根据线性叠加原理,建立重复压裂井周围应力场分布模型;根据裂纹破裂准则,建立了重复压裂裂缝起裂角数学模型,得出重复压裂裂缝起裂角范围,并通过两口重复压裂井计算结果与生产结果进行对比,表明模型计算结果准确,且计算方法实用。
英文摘要：
Considering the pore pressure of injection/production around the refracturing well under coupling liquid/solid, mathematical models are established to describe the maximum principal stress and orientation angle of maximum principal stress induced by pore pressure around refracturing wells. Considering that the initial artificial fracture is full of incompetent and compressible fluid, affection efficient of fluid is presented; the model of stress field induced by initial artificial fracture is established. According to the linear superimposition law, model of stress field distribution around refracturing well is established. According to the breakdown formula of the crack, model of initial angle of refracturing is set up. The refracturing initial angle variation range is obtained. Both the calculation and the production results of two refracturing wells are compared, which shows that the calculation of the refracturing initial angle is accurate, and the method is practical.
同期刊论文项目
同项目期刊论文
Experimental Study on the Molecular Dimensionand Configuration of Polymer and its Flow Characteristi
Investigation on Mechanisms of Polymer Enhanced Oil Recovery by Nuclear Magnetic Resonance and Micro
位置：