位置：成果数据库 > 期刊 > 期刊详情页
挤压态7075铝合金高温流变行为及神经网络本构模型
  • 期刊名称：中国有色金属学报
  • 时间：0
  • 页码：2880-2887
  • 语言：中文
  • 分类：TG146[金属学及工艺—金属材料;一般工业技术—材料科学与工程;金属学及工艺—金属学]
  • 作者机构：[1]西北工业大学材料学院,凝固技术国家重点实验室,西安710072
  • 相关基金：Project （50935007） supported by the National Natural Science Foundation for Key Program of China; Project （2010CB731701） supported by the National Basic Research Program of China; Project （50905145） supported by the National Natural Science Foundation of China
  • 相关项目：重大复杂构件多向主动加载控制成形基础理论研究
作者： 杨合|李志颖|王煜|孙志超|
关键词： 圆角半径, 拔模斜度, T型构件, 局部加载, 主应力法, fillet radius, draft angle, T-shaped component, local loading, slab method
中文摘要：

为了研究几何参数对T型构件局部加载过程的影响,应用主应力法建立了充分考虑圆角半径、拔模斜度的新模型。实验和数值模拟结果验证表明新数学模型的结果更接近于实验和数值模拟值;拔模斜度的影响可以忽略;圆角半径的影响显著,特别是在圆角半径和筋宽的比率小于0.75的情况下更为显著。

英文摘要：

In order to study influences of geometric parameters on the T-shaped components local loading process, a new mathematical model considering the fillet radius and draft angle was established by using the slab method. The results obtained by the mathematical model agree with the data form experiment and numerical simulation, and the results are closer to the experimental and simulation results. The influence of draft angle may be neglected under the forming conditions used. The influence of fillet radius is notable, especially in the case that the ratio of fillet radius to rib width is less than 0.75.

同期刊论文项目
重大复杂构件多向主动加载控制成形基础理论研究
期刊论文 79 会议论文 33 获奖 4 专利 10
大型复杂整体构件等温局部加载精确成形不均匀变形协调机理
期刊论文 41 会议论文 4 专利 1
同项目期刊论文
Research on Microstructure Evolution in Preforming of Large Complex Integral Component of TA15 Titan
铸态7050铝合金大应变速率下有外推能力的本构模型
Study on forming Feasibility of AISI-5140 Triple Valve by Multi-Way Loading: from aspect of geometri
片层组织TA15钛合金的热变形行为及组织球化
基于Deform反传热模型表面换热系数的确定
Nucleation and growth mechanism of α-lamellae of TA15 Ti-alloy cooling from α+β pha
Microstructure Evolution and Microhardness of 7075 Aluminum Alloy during Heat Treatment by Consideri
挤压态7075铝合金再结晶经验模型及应用
TA15钛合金等温近β变形行为及微观组织演化
Hot Deformation Behavior and Fracture of As-extruded 7075 Aluminum Alloy
TA15钛合金大型复杂整体构件预锻成形微观组织演化研究
TA15钛合金多道次等温局部常规锻热变形行为研究
FE Analysis on Deformation and Temperature Nonuniformity of AISI-5140 Steel Triple Valve Multi-Way L
TB6钛合金热变形行为及本构模型研究
Effects of Parameters on Inhomogeneous Deformation and Damage in Isothermal Local Loading Forming of
基于改进BP神经网络的TA15钛合金近β锻造组织预测模型
Deformation behavior of variable-thickness region of billet in rib-web component isothermal local lo
TA15钛合金复杂构件预锻初始毛坯形状优化
钛合金筋板件等温局部加载模具应力分析
AISI-5140三通阀多向加载成形开裂预测
TC11钛合金流变行为及其应变分段本构模型
Effect of Extrusion Ratio on Microstructure and Mechanical Properties of As-cast AZ91D Magnesium All
片层组织TA15钛合金的热变形行为及组织球化
空心坯料反挤压省力成形方法及应用研究
Effects of Multiple Plastic Deformations on Microstructure and Mechanical Properties of 7A04 Ultra-h
Corrosion properties of plastically deformed AZ80 magnesium alloy
四通阀多向加载成形参数影响模拟分析
Influence of Plastic Deformation on Mechanical Properties and Microstructure of Annealed ZL102 Alloy
三通件多向加载成形热力耦合有限元分析
挤压变形对ZL102材料组织和性能的影响
止推轴承座挤压成形过程中产生折叠缺陷的原因及解决方案
AZ80镁合金热变形中第二相析出机理研究
正挤压对铸态AZ31镁合金组织与性能的影响
Forming Quality of Titanium Alloy Large-Scale Integral Components Isothermal Local Loading
TA15合金H型构件等温局部加载成形工艺研究
热变形对AZ80镁合金组织性能的影响
New extrusion process of Mg alloy automobile wheels
基于DEFORM的履带板多向主动加载成形数值模拟
BTi-62421S合金高温变形流动应力模型
热变形参数对BTi-62421S合金微观组织及性能的影响
Effect of Aging on the Microstructures and Mechanical Properties of AZ80 and ZK60 Wrought Magnesium
挤压温度对退火态ZL102合金组织和性能的影响
Modelling of Microstructure Evolution In AISI 5140 Steel Triple Valve Forming Under Multi-Way Loadin
樊晓光.片层组织TA15钛合金热变形行为及组织球化研究
3D-FE modelling and simulation of multi-way loading process for multi-ported valves
Analysis of local loading forming for titanium-alloy T-shaped components using slab method
枝杈类壳体零件多向主动加载成形模具结构参数优化
TC11 alloy flow behavior and constitutive model using piecewise function of strain
Influence of homogenizing on mechanical properties of as-cast AZ31 magnesium alloy
履带板挤压成形加载速度对金属流动规律影响的研究
时效处理对AZ80和ZK60镁合金微观组织和力学性能的影响(英文)
Influence of Solution Treatment on Impact Toughness and Microstructure of Cobalt-free Maraging Steel
铸态7050铝合金大应变速率下有外推能力的本构模型建立
High temperature deformation behavior of BTi-62421S alloy
Microstructure evolution of different loading zones during TA15 alloy multi-cycle isothermal local f
几种基于回归方法的本构模型研究及其在TB6合金上的应用
TA15钛合金复杂构件预锻初始毛坯形状优化(英文)
Study on mechanical behavior for warm extrusion of AZ61 magnesium alloy
Mechanism of unequal deformation during large-scale complex integral component isothermal local load
钛合金大型复杂件预制坯成形工艺模拟研究
Transformation mechanism of lamellar microstructure of AZ80 wrought Mg alloy during warm deformation
TA15钛合金大型复杂整体构件预锻成形微观组织演化研究
TA15钛合金多道次等温局部常规锻热变形行为研究
Influence of Plastic Deformation on the Mechanical Properties and icrostructure of Homogenized AZ80
TB6钛合金热变形行为及本构模型研究
铝合金筒件侧向等温挤压成形的金属流动分析
TA15钛合金复杂构件预锻初始毛坯形状优化
钛合金筋板件等温局部加载模具应力分析
AISI-5140三通阀多向加载成形开裂预测
汽车镁合金轮毂等温挤旋成型工艺优化与试验
基于逐步回归法的TA15钛合金本构模型的建立
热变形对ZK60镁合金组织及性能的影响
热轧过程中加热炉炉温优化控制方法
新型多向主动加载模具结构优化设计
Analysis on flow stress of magnesium alloys during high temperature deformation
大型钛合金隔框等温闭式模锻成形工艺优化
多向加载近净成形研究动态
Transformation mechanism of lamellar microstrucmre of AZ80 wrought Mg alloy during warm deformation
Thermo-mechanical coupled analysis of hot ring rolling process
Finite element simulation of aluminum alloy cross valve forming by multi-way loading
时效处理对AZ80和ZK60镁合金微观组织和力学性能的影响
TC11钛合金流变行为及其应变分段本构模型