位置：成果数据库 > 期刊 > 期刊详情页
铝-金属玻璃-铝复合板的抗破甲性能研究
  • 期刊名称：北京大学学报(自然科学版)
  • 时间：0
  • 页码：779-783
  • 语言：中文
  • 分类：O385[理学—流体力学;理学—力学]
  • 作者机构：[1]北京大学工学院,湍流与复杂系统国家重点实验室,北京100871, [2]大连理工大学工程力学系,大连116023
  • 相关基金：国家自然科学基金资助项目（10732010,10972010）
  • 相关项目：纳米氧化物气相爆轰合成机理研究
作者： 李晓杰|刘伟东|闫鸿浩|冯荣欣|刘凯欣|
关键词： 爆炸力学, 金属玻璃, 聚能装药, 射流, 侵彻, mechanics of explosive, metallic glass, shaped charge , jet , penetration
中文摘要：

利用爆炸焊接技术成功制备出铝-金属玻璃-铝三层复合板,并对其抗破甲性能进行了试验及数值分析。针对复合板的尺寸较小的特点,建立了适用于小试件（特征尺寸小于50mm）的破甲实验方案;基于动力学软件ANSYS/LS-DYNA提出了一套对破甲过程进行数值模拟的计算方案。研究结果表明,破甲试验装置产生的聚能射流直径较小、稳定性良好,铝-金属玻璃-铝三层复合板在聚能射流作用下其上表面呈大范围的花瓣形破坏,中间层的金属玻璃材料呈粉末状破碎,对后续的射流过程起到了干扰的作用;计算方案可有效地模拟聚能射流的形成及其对铝-金属玻璃-铝三层复合板的侵彻;数值模拟得到的破甲深度、稳定阶段侵彻通道的直径、材料的破坏模式与实验结果相符。

英文摘要：

An aluminum-metallic glass-aluminum sandwich panel was fabricated by explosive welding technique and its property against shaped charge jet penetration was studied experimentally and numerically. Considering the small dimension of the sandwich panel, an experimental scheme was presented for penetration experiment on small specimen （character dimension less than 50 mm） ; a numerical calculation scheme for simulating the experimental process was developed based on ANSYS/LS-DYNA. The experimental resuhs indicate that the shaped charge could produce jet with small diameter and good stabilization; wide region petalling is found on the upper surface of the aluminum-metallic glass-aluminum sandwich panel; metallic glass near the jet receives crushing damage, which obstructs the jet penetration; the numerical calculation scheme could simulate the process of penetration effectively; the depth of the penetration, the diameter of the penetration channel and the failure mode obtained by numerical simulation accord with the corresponding experimental results.

同期刊论文项目
极端条件下非晶态材料及结构的力学行为
期刊论文 71 会议论文 9 获奖 2
功能材料爆炸焊接的力学机理研究
期刊论文 27 会议论文 16
纳米氧化物气相爆轰合成机理研究
期刊论文 56 会议论文 21 获奖 1
同项目期刊论文
钢管列缩比模型抗穿甲能力研究
New numerical algorithms in SUPER CE/SE and their applications in explosion mechanics
Experimental research on dynamic mechanical properties of PZT ceramic under hydrostatic pressure
时-空守恒元解元(CE/SE)方法综述
A high-resolution Eulerian method for numerical simulation of shaped charge jet including solid-flui
DYNAMIC BUCKLING BEHAVIOR OF MULTI-WALLED CARBON NANOTUBES SUBJECTED TO STEP AXIAL LOADING
Notable internal thermal effect on the yielding of metallic glasses
Tuning the band-gap of phononic crystals with an initial stress
An improved two-dimensional unstructured CE/SE scheme for capturing shock waves
时一空守恒元解元（CE／SE）方法综述
Tuning of band-gap of phononic crystals with initial confining pressure
二级电炮加载技术研究
冲击加载下Zr51Ti5Ni10Cu25Al9金属玻璃的塑性行为
Deformation behaviors of a TiZrNiCuBe bulk metallic glass under shock loading.
High temperature deformation behaviors of Ti40Zr25Ni3Cu12Be20 bulk metallic glass
Mechanical performance of metallic glasses during nanoscratch tests.
Shock compression response of a Zr-based bulk metallic glass up to 110 GPa
Indentation Creep of an Fe-based Bulk Metallic Glass,
Indentation Creep of a Ti-based Metallic Glass,
Thermodynamic Characteristics of Ti-based Glass-Forming Alloys,
A New Combined Scheme of Discrete Element Method and Meshless Method for Numerical Simulation of Con
地下防护结构在冲击载荷作用下的动态破坏过程
动高压加载下锆基金属玻璃强度测量
In situ TEM observations of unusual nanocrystallization in a Ti-based bulk metallic glass.
New numerical algorithms in SUPER CE/SE and their applications in explosion mechanics SUPER CE/SE的新
Inhomogeneous Structure and Glass-Forming Ability in Zr-Based Bulk Metallic Glasses
Cooling rate effect of nanomechanical response for a Ti-based bulk metallic glass.
Dynamic Buckling of Double-Walled Carbon Nanotubes under Step Axial Load
Influence of strain-rate on compressive-deformation behavior of a Zr–Cu–Ni–Al bulk metallic glass at
New Zr-Cu-Ni-Al Bulk Metallic Glasses With Superhigh Glass-Forming Ability
Atomic Structure and Diffusion in Cu60Zr40 Metallic Liquid and Glass: Molecular Dynamics Simulations
Dynamic Column Buckling of Multi-Walled Carbon Nanotubes under Axial Impact Load
Mechanical behavior of a Zr-based metallic glass at elevated temperature under high strain rate
Improved CE/SE scheme with particle level set method for numerical simulation of spall fracture due
Inhomogeneous structure and glass-forming ability in Zr-based bulk metallic glasses.
Indentation size effect of hardness of metallic glasses
Temperature influence on sintering with concurrent crystallization behavior in Ti-based metallic gla
Compressive fracture characteristics of Ni42Cu5Ti19Zr22.5Al8Si3.5 bulk metallic glass
Enhanced strength and plasticity of a Ti-based metallic glass at cryogenic temperatures
Metastable nanocrystallization behavior of Ti-based metallic glassy powders during post-heating
An Improved CE/SE Scheme for Multi-Material Elastic-Plastic Flows and its Applications
New Discrete Element Models for 3-D Impact Problems
Metallic glass coating on metals plate by adjusted explosive welding technique
Mechanical Property of a New Zr-based Bulk Metallic Glass with Certain Plasticity at Low Temperature
Tuning the mechanical performance of a Ti-based bulk metallic glass by pre-deformation.
New Discrete Element Models for Elastoplastic Problems
Influence of Strain Rate on Compressive Deformation Behavior of a Zr-Cu-Ni-Al Bulk Metallic Glass at
Hypervelocity impact on Zr51Ti5Ni10Cu25Al9 bulk metallic glass.
On the Atomic Anisotropy of Thermal Expansion in Bulk Metallic Glass.
Dynamic behavior of a Zr-based metallic glass at cryogenic temperature
Experimental research on dynamic mechanical properties of PZT ceramic under hydrostatic pressure, Ma
A Void Growth Model Considering the Bauschinger Effect and Its Application to Spall Fracture
Micro-nano scale ripples on metallic glass induced by laser pulse
Three-dimensional simulation of detonation propagation in a rectangular duct by an improved CE/SE sc
Shear stability of metallic glasses.
A high-resolution Eulerian method for numerical simulation of shaped charge jet including solid–flui
New Approaches to the Computer Simulation of Amorphous Alloys: A Review
时—空守恒元解元(CE/SE)方法综述
预压载荷下Zr51Ti5Ni10Cu25Al9块体非晶合金快速加热时的变形与破坏
An Improved CE/SE Scheme for Numerical Simulation of Gaseous and Two-Phase Detonations
Numerical Study on Critical Wedge Angle of Cellular Detonation Reflections
The failure stress of bulk metallic glasses under very high strain rate
Dynamic torsional buckling of multi-walled carbon nanotubes embedded in an elastic medium
时一空守恒元解元（CE／SE）方法综述
Tuning of band-gap of phononic crystals with initial confining pressure
高速冲击问题的离散元法数值模拟
预压下锆基块体非晶合金的热冲击变形与破坏
纳秒脉冲激光辐照金属玻璃表面结构形成机制
爆轰法制备碳包覆铁镍合金纳米颗粒及其表征
硝酸铁对RDX热分解行为的影响
爆炸焊接界面波的数值模拟
爆炸焊接斜碰撞过程的数值模拟
爆轰合成用的乳化炸药制备工艺与爆轰特性
Heat transfer analysis of the micron-scale agglomerates of TiO2 precursor during the detonation proc
爆炸焊接界面波的模拟研究
Control preparation of nano γ phase aluminum oxide by explosive temperature
Ⅰ型裂纹尖端圆弧对应力强度因子影响的数值研究
Synthesis and characterization of carbon-encapsulated iron/iron carbide nanoparticles by a detonatio
Preparation and magnetic behavior of carbon-encapsulated iron nanoparticles by detonation method
硝酸铈爆轰制备球形纳米CeO_2颗粒
爆炸压实制取W-Cu纳米复合材料的实验研究
不同前驱体浓度下气相爆轰方法制备纳米TiO2粉体研究
Synthesis of carbon-coated iron nanoparticles by detonation technique
掺杂硝酸镍的RDX炸药混合物的热分解性能的研究
地下防护结构在冲击载荷作用下的动态破坏过程
碳包覆镍/钴纳米颗粒的爆轰合成法
Preparation of Carbon-Encapsulated Ferronickel Nanoparticles by Detonation Method and Its Characteri
半球阻波结构体底部的约束形式
复合乳化剂制备乳化炸药的热分解行为
几种乳化炸药的热分解动力学行为
爆轰合成碳包覆钴、镍磁性纳米颗粒的探索
乳化炸药密度与纳米MnFe_2O_4颗粒爆炸合成
滑移爆轰驱动平板的计算机仿真
合成碳包覆纳米金属材料的研究现状
冷爆炸压实中纳米陶瓷粉末摩擦传热研究
Influence of Initial Pressure on the Nano-TiO(2) Particles Synthesized by Gaseous Detonation
爆轰法合成碳包覆纳米铜颗粒
基于晶体三维点阵热振动物理力学分析的Mie-Grüneisen状态方程
Mie-Grüneisen状态方程的物理力学释义
大型浅埋隧道爆破工程安全管理模式
水下爆炸焊接制备NiTi合金与铜箔复合板
烟囱爆破拆除及其振动测试分析
不同爆轰管温度下氢氧气相爆轰合成碳包铁纳米颗粒研究
基于尖点突变理论的浆砌块石边坡稳定性研究
气相爆轰法合成含铁多壁碳纳米管
碳包覆铁纳米颗粒的气相爆轰合成
前驱体相对物质的量的变化对氢氧气相爆燃制备纳米SiO_2颗粒的影响
气相爆轰合成纳米SnO2
城市浅埋隧道爆破原理
基于保护地下管线浅埋隧道爆破探索
沉箱在近距离强夯下的振动安全探索
石墨包覆纳米镍颗粒的结构及磁性能的表征
纯铜表面纳米氧化铝弥散强化覆层的制备研究
乳化炸药密度与纳米MnFe2O4颗粒爆炸合成
加速度功率谱密度指标控制下的爆破研究
滑移爆轰作用下飞板运动规律的特征线差分法研究
多壁碳纳米管的爆轰改性