位置：成果数据库 > 期刊 > 期刊详情页
Fatigue Abrasion Behavior of Laser Coating Under Repeated Impact Loads
  • ISSN号：1936-6612
  • 期刊名称：Advanced Science Letters
  • 时间：2011.7.7
  • 页码：2262-2266
  • 相关项目：环形激光光内同轴送丝熔覆光丝耦合及热作用机制
作者： Fu, Geyan|
同期刊论文项目
环形激光光内同轴送丝熔覆光丝耦合及热作用机制
期刊论文 30 会议论文 2 专利 6
同项目期刊论文
光内送粉激光熔覆堆积变径回转体工艺参数的控制
Concentric cylindrical metamaterials for subwavelength dark hollow light cones
Study on the Similar Creep Behaviors and Mathematical Laws of 1Cr18Ni9Ti under Low Stress Repeated I
Study on Intelligent Control of Laser 3D Rapid Prototyping Based on PMAC
Experimental Study Based on the Widening Melting Roads Cladding Forming of the Hollow Laser
The plastic deformation and enhancement of 304stainless steel under low stress repeat impact
基于环形光光内送粉激光熔覆温度的场数值模拟
占空比变化对环形激光光内送粉熔池温度场影响研究
中空光离焦量对单熔道质量的影响
环形激光光内送粉成形薄壁件熔池特征研究
中空光光内送丝熔覆工艺参数对熔覆层质量的影响
基于PMAC的激光三维堆积层高随动控制系统的研究
核阀密封面无钴镍基熔覆层高温性能研究
The Development of Temperature Measurement System in Laser Molten Pool Based on Monochrome CCD with
Study on the Effects of Process Parameters on Weld Joint using Coaxial Inside-Beam Wire Feeding
Process Parameters Control of Deposition of Hollow Cylindrical Part with Internal Wire Feeding throu
Study on laser rapid prototyping of high thin-walled revolved parts with variable diameters based on
基于离焦技术的光内送粉堆积变径体壁厚控制研究
奥氏体不锈钢激光熔覆镍基复合涂层高温磨损行为
Study of cobalt-free, Fe-based alloy powder used for sealing surfaces of nuclear valves by laser cla
基于环形光光内送粉激光熔覆温度场的数值模拟
保护气压力对光内送粉喷嘴粉末流场的影响研究
基于光内同轴送丝激光熔覆斜壁的成型技术
TFT LCD常见点缺陷的检测与修复
激光熔覆NiCr／Cr3C2-WS2自润滑耐磨涂层的高温摩擦学行为