欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
报道了一种新型的聚甲基丙烯酸甲酯（PMMA）/聚二甲基硅氧烷（PDMS）复合芯片。该芯片采用PMMA-PDMS…PDMS-PMMA的四层构型,以在芯片上集成气动微阀。具有液路和控制通道网路的PMMA基片与PDMS弹性膜间采用不可逆封接,分别形成液路半芯片和控制半芯片,而2个半芯片则依靠PDMS膜间的粘性实现可逆封接,组成带有微阀的全芯片。这种制备方法解决了制备PMMA-PDMS-PMMA三层结构芯片的封接难题,封接过程简单可靠。其控制部分和液路部分可以单独更换,可进一步降低使用成本,尤其适合一次性应用场合。初步实验表明：该微阀具有良好的开关性能和耐用性。
英文摘要：
A novel polymethyhnethacrylate （PMMA）/polydimethylsiloxane （PDMS） hybrid polymer microfluidic chip is reported. The chip has 4-layer structure of PMMA-PDMS…PDMS-PMMA to integrate the pneumatic microvalves. The fluid PMMA substrate and control PMMA substrate are irreversibly bonded to an elastic PDMS membrane to respectively form the fluid half chip and control half chip. Relying on the adhering property of the PDMS membranes,the fluid and control halves are reversibly bonded to form a complete chip with micro valves. This method solves the bonding problems occurred in fabricating PMMA-PDMS-PMMA 3-layer microfluidic chip and the bonding process is simple and reliable. The control half and fluid half are allowed to be replaced individually, so the operation cost can be further reduced,which makes this mierofluidic chip especially suitable for disposable use. The preliminary experiment results show that the microvalve has excellent switching performance and durability.
同期刊论文项目
同项目期刊论文
Thermoswitchable Electrokinetic Ion-Enrichment/Elution Based on a Poly(N-isopropylacrylamide) Hydrog
On-chip integrated multi-thermo-actuated microvalves of poly(N-isopropylacrylamide) for microflow in
A polymeric dual-channel amperometric biosensor chip capable of symmetrically splitting sample bands
Proliferation and multi-differentiation potentials of human mesenchymal stem cells on thermo-respons
Fabrication of fluidic chips with 1-D nanochannels on PMMA substrates by photoresist-free UV-lithogr
Rapid analysis of anthracycline antibiotics doxorubicin and daunorubicin by microchip capillary elec
Thermomodulated cell culture/harvest in polydimethylsiloxane microchannels with poly(N-isopropylacry
Droplet-Based Microfluidic Flow Injection System with Large-Scale Concentration Gradient by a Single
Region-selective Metalization of Poly(methylmethacrylate) Surface Based on UV/ozone Surface Modifica
Fabrication of 1D nanofluidic channels on glass substrate by wet etching and room-temperature bondin
Valveless gated injection for microfluidic chip-based liquid chromatography system with polymer mono
Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Conc
期刊信息
位置：