欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用光学显微镜、万能材料试验机、X射线衍射仪、电子探针和扫描电镜等手段分析了Mg-6Al-xZn合金的显微组织和力争性能。结果表明：加入不同锌含量的Mg-6Al合金显微组织主要由α-Mg、β-Mg_（17）Al_（12）和τ-Mg_（32）（Al,Zn）_（49）相组成;随着锌含量的增加,合金中第二相的数量增多,晶粒逐渐细化;Mg-6Al-6Zn合金具有最高的室温抗拉强度和韧性,当锌含量超过6%后合金晶粒粗化,综合力学性能下降。
英文摘要：
The microstructure and mechanical properties of Mg-6Al-xZn alloys were investigated by means of optical microscope,universal tester,X-ray diffractometer,electron probe microanalyzer and scanning electron microscope.The results indicate that the microstructure of Mg-6Al-xZn alloys with different Zn contents was mainly composed ofα-Mg,β-Mg_（17） Al_（12） phase andτ-Mg_（32）（Al,Zn）_（49） phase.With the increasing of Zn content,the amount of the second phase in the alloys gradually increased and the grains were refined.The Mg-6Al-6Zn alloy had the highest tensile strength at room temperature and the highest toughness.When the content of Zn was more than 6wt%,the universal mechanical properties of the alloy decreased with the grain size increasing.
同期刊论文项目
同项目期刊论文
期刊信息
位置：