欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用Cr3C2、VC掺杂超细WC为原料和无压真空烧结工艺,通过合金微观组织结构的观察与分析,研究了添加质量分数为0.3%的Co对无金属粘结相WC硬质合金烧结致密化与WC晶粒生长行为的影响。结果表明,微量Co的存在加速了WC的烧结致密化过程,与此同时也导致了WC晶粒明显的各向异性非连续晶粒长大。在上述研究基础上,提出了一种无金属粘结相WC硬质合金的低成本制备工艺,探讨了超细硬质合金中WC晶粒生长机制,提出了超细硬质合金的质量改进建议。
英文摘要：
Using the ultrafine WC powder doped with Cr3C2 and VC as the raw material,the effects of 0.3% cobalt（mass fraction） addition on the densification and WC grain growth during the sintering process of the binderless cemented tungsten carbide,which was sintered in a conventional vacuum furnace,were investigated through the microstructure observation.It is shown that the densification of tungsten carbide is accelerated due to the existence of small amount of cobalt,accompanied by an anisotropic and discontinuous WC grain growth.Based on the research,a preparation technique of binderless cemented tungsten carbide with low cost is suggested.The mechanism of the WC grain growth is discussed and the quality improvement is proposed for the ultrafine cemented carbide.
同期刊论文项目
同项目期刊论文
Effects of cubic carbides and La additions on WC grain morphology, hardness and toughness of WC-Co a
Effect of strain rate on the compressive behaviour of a Zr56Al10.9Ni4.6Cu27.8Nb0.7 bulk metallic gla
Conversion of natural egg-shell to 3D flower-like hydroxyapatite agglomerates for highly sensitive d
Sea cucumber-like hydroxyapatite: cation exchange membrane-assisted synthesis and its application in
In situ formation of La containing dispersed phase on the sinter skin of La2O3 and Cr3C2 unitedly do
Influence of copper content on the microstructure and hardness of copperdoped tungsten carbide-cobal
期刊信息
位置：