欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
针对微通道冷却和冲击射流冷却方式的不足，设计了一种新的带冲击射流的柱肋结构的通道热沉，通过数值模拟的方式研究其流动特性和换热性能，模拟工况为加热热流密度为400W／cm^2，进口总压从3．5-12．5kPa，出口静压为500Pa，工质为水，热沉的材料为铜，进口温度为300K。模拟计算结果表明，该结构具有较高的换热效果和良好的表面温度均匀性，在进口总压为3．5kPa时，表面的最高温度不超过380K，加热面最高温度和最低温度的差值约为12K；而当进口总压为12．5kPa时，最高温度和温差值分别为368K和约5K。在进口总压为3．5—12．5kPa，所研究结构的热沉的流量为3．03—6．32g/s。
英文摘要：
A new structure heat sink is designed to get better heat transfer performance. It is a hybrid of jet impingement, column and mini channel cooling scheme. Numerical simulations are used to explore the three-dimensional flow characteristics and heat transfer performance by standard k-ε turbulent model. The heat sink is copper and the cooling liquid is water. The temperature at inlets is 300 K and the heat flux is 400 W/cm^2. The results show that higher inlet pressure will improve the mass flux and reduce bottom temperature, as well as the difference between highest temperature and the lowest temperature of the heated surface. The flow mass rate is 0.00632 kg/s as the inlet pressure is 12.5 kPa. The highest temperature of the heat surface is below 368 K and the difference was 5 K.
同期刊论文项目
同项目期刊论文
Experiment study of the size effects on electron-phonon relaxation and electrical resistivity of pol
Theoretical and experimental study of the thermal contact resistance at the junction of crossed cyli
Two-dimensional molecular dynamic simulations on accommodation coefficients in nanochannels with var
Experimental study of ultra-fast heat conduction process in metals using femtosecond laser thermal r
Measurements of electron-phonon coupling factor and interfacial thermal resistance of metallic nano-
Theoretical and experimental study on the heat transport in metallic nanofilms heated by ultra-short
Experimental study on the influences of grain boundary scattering on the charge and heat transport i
Superhydrophobicity of Self-Organized Surfaces of Polymer Nanowire Arrays Fabricated by a Nano-Injec
期刊信息
位置：