采用以B-C陶瓷为基体自愈合改性组元的2D-C/[SiC-(B-C)]以及经过硅硼玻璃改性的2D-C/[SiC-(B-C)]制备浮壁瓦片,分别在1000、1200、1350℃下对其进行发动机燃烧室环境考核.对考核后的浮壁瓦片进行取样,并在室温下进行拉伸强度以及三点弯曲强度测试.结果发现:经过环境考核试样的力学性能都有不同程度的提高,拉伸强度和三点弯曲强度随着考核温度的升高而提高,其中三点弯曲强度的升高速率更快.通过SEM观察,B-C自愈合组元氧化生成的玻璃相以及改性硅硼玻璃相在考核过程中有效地封填了试样的孔隙和裂纹.最后通过力学性能测试结合SEM观察,初步分析了两种复合材料在航空发动机燃烧室中的愈合机制.
2D-C/[SiC-(B-C)] samples modified by B-C ceramic as self-healing component and boron-silicon glass phase were assessed by environmental engine experiments at 1000℃,1200℃,1350℃.Furthermore,tensile strength and three point bending strength of the samples were tested at room temperature after assessment.The re-sults showed that the tensile strength and three point bending strength increased with the increase of assessment temperature,however,three point bending mechanical properties increased at a higher rate.SEM results showed that the glass phase generated by oxidization of B-C self-healing component and the boron oxide glass phase filled pores and cracks effectively.According to the experiments results,the self-healing mechanisms in aero-engine combustion chamber of such two samples were discussed.