欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
介绍了七孔探针用于亚音速可压缩流的标定方法。作为一种可以同时获得流动速度大小、流动偏角、总压和静压的气动测量装置,七孔探针被广泛应用于各种流动测量,包括可压缩流动。但是它的校准过程周期很长,代价昂贵,影响了探针的推广。本文以数值计算为手段,对七孔探针进行亚音速可压缩流校准与测量的研究。结果表明,其校准拟合精度流动角为2%,内外区的总静压相对标准偏差都没有超过3%,高于相同状态下的实验校准精度。在实际应用中,本方法用于指导传统实验标定方法,可以节约大量的标定时间和成本,使七孔探针在亚音速可压缩流的测量变得简单可行。
英文摘要：
This paper presents a calibrating method of measuring relative flow velocity,flow angle,local total and static pressure for subsonic compressible flows using seven-hole probe. Seven-hole probe （SHP） is a device that can simultaneously measure the pressure and velocity of a steady flow,especially the parameters of compressible flow. However,the costly and time-consuming calibration impedes its extensive application. Study of calibration and measurement method for compressible flow was carried out using seven-hole probe （SHP） based on the data from numerical simulation. Results show that the accuracy of calibration fitting of flow angle is about 2%,the relative value of both total pressure and static pressure are less than 3%. These results are better than experimental calibration accuracy in the same situation. In practice,this method is used to replace or guide traditional experimental calibration method,it can save a lot of calibration time and cost,so that seven-hole probe measurement for subsonic compressible flow has become simple and feasible.
同期刊论文项目
同项目期刊论文
期刊信息
位置：