欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
基于显微镜并且图象处理，汽车工具为微 milling 设定的一个新方法被介绍。第一，工具背景区域的一幅实时图象被显微镜和电荷耦合器件照相机获得，然后，图象处理在在工具之间的这幅图象和差距上被执行，细工品是计算的。差距测量被送打手势控制卡片让工具来临到细工品的表面。这些步被重复直到差距是零，它意味着那个工具背景被完成。而且，可靠性确认测试被进行。结果显示工具设定的精确是令人满意的。
英文摘要：
Based on microscope and image processing, a new method of auto tool setting for micro milling was pre- sented. Firstly, a realtime image of tool setting area was obtained by microscope and CCD camera, then image proc- essing was carried out on this image and the gap between the tool and workpiece was calculated. The gap measure- ment was sent to motion controlling card to make the tool approach to the surface of workpiece. These steps were repeated until the gap is zero, which means that tool setting was finished. Moreover, a reliability verification test was conducted. Results indicated that the precision of tool setting is satisfactory.
同期刊论文项目
同项目期刊论文
Analysis of Effecting Factors on Surface Finish of Fused Silica Glass Grinding with inclined Ball-He
Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupte
Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-
Research on accuracy analysis and performance verification test of micro precise five-axis machine t
A numeric investigation of friction behaviors along tool chip interface in nanometric machining of a
Numerical analysis of aeroacoustic noise for high-speed face milling cutters in three dimensional un
On-machine Precision Preparation and Dressing of Ball-headed Diamond Wheel for the Grinding of Fused
Fabrication of spherical mitigation pit on KH2PO4 crystal by micro-milling and modeling of its induc
期刊信息
位置：