位置：成果数据库 > 期刊 > 期刊详情页
Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-
  • 期刊名称：The International Journal of Advanced Manufacturin
  • 时间：2013
  • 页码：1735-1740
  • 相关项目：基于多重尺度效应耦合的超硬微铣刀设计理论和制造技术
作者： Su G S|Liu Z Q|
同期刊论文项目
基于多重尺度效应耦合的超硬微铣刀设计理论和制造技术
期刊论文 50 会议论文 41 专利 26
同项目期刊论文
面铣刀气动噪声数值模拟及不等齿距面铣刀的降噪方法
Simulation and analysis of aerodynamics for high speed face milling cutters
An experimental study on influences of material brittleness on chip morphology
整体式螺旋微径刀具的应用研究进展
小直径金属基球头金刚石砂轮电火花修整技术的研究
仿生光学复眼设计及其制造技术研究新进展
聚晶金刚石微细立铣刀的设计制造
Analysis of Effecting Factors on Surface Finish of Fused Silica Glass Grinding with inclined Ball-He
Method of precise auto tool setting for micro milling
高速面铣刀气动噪声及其频谱分析
高速面铣刀气动噪声计算与分析
夹杂物对FGH95粉末高温合金切削加工力学特性的影响
高速切削锯齿形切屑形成机理的研究现状与发展
高速切削锯齿形切屑表征的研究现状综述
J-C本构参数对绝热剪切影响的敏感性分析
Definition and determination of the minimum uncut chip thickness of microcutting
Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupte
高速切削过程中的材料流体特性研究
平面铣削刀具前刀面瞬态切削温度的研究
Characteristics of chip evolution with elevating cutting speed from low to very high
Ti6Al4V 切削锯齿形切屑绝热剪切带变形的表征
Damage of the machined surface and subsurface in orthogonal milling of FGH95 superalloy
镍基高温合金高速铣削加工表面完整性
镍基粉末高温合金切削加工表面白层研究
Research on the Modeling of Burr Formation Process in Micro Ball End Milling Operation on Ti-6Al-4V
Research on accuracy analysis and performance verification test of micro precise five-axis machine t
Size Effect on Surface Roughness in Micro Turning
基于有限元法的微径铣刀变形分析
A numeric investigation of friction behaviors along tool chip interface in nanometric machining of a
Numerical analysis of aeroacoustic noise for high-speed face milling cutters in three dimensional un
聚晶金刚石的电火花线切割加工研究
On-machine Precision Preparation and Dressing of Ball-headed Diamond Wheel for the Grinding of Fused
Fabrication of spherical mitigation pit on KH2PO4 crystal by micro-milling and modeling of its induc
微铣削加工机理研究新进展
Process investigation on meso-scale hard milling of ZrO2 by diamond coated tools
Precision milling of high volume fraction SiCp/Al composites with monocrystalline diamond end mill
Mechanism of Chip-Formation in Nanometric Cutting of Single-Crystal Copper by Molecular Dynamics
Influence of size effect on burr formation in micro cutting
Research on the influence of machining introduced sub-surface defects and residue stress upon the me
Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH95
微细铣削氧化锆陶瓷铣削力特征分析
基于钝圆尺寸效应的微细切削机理试验研究
圆弧铣刀瞬态切削力建模与数值仿真
纳米切削过程中刀-屑接触区应力分布
高精密微细切削加工机床的研制
小直径金属基球头金刚石砂轮电火花修整技术