欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
针对某机电设备模拟器通用性和自检能力较差的问题，设计了一套基于高性能ARM处理器和uClinux操作系统的模拟器系统，智能化程度较高。根据信号类型的不同设计了相应的通道，完成了其硬件电路的设计，接口电路采用CPLD实现，提高了系统的通用性。设计了系统的自检功能，使系统的可靠性较高，最后完成了uClinux操作系统的移植及软件的设计。该系统具有较好的应用前景。
英文摘要：
Aiming at the problem that the simulator of certain electromechanical equipment is in low level of generality and self--test capability. A set of simulator based on high capability ARM processor and uClinux operation system is designed. So it＇ s intelligent level is higher. Corresponding channels have been designed according to the different type of the signal, and the design of it＇ s hardware circuit has been achieved. The interface circuit achieved by CPLD so as to improve the generality of the system. The system＇ s self--test function has been designed so that the system＇ s reliability is higher. The transplant of uClinux operation system and the design of soft has been achieved in the end. The system has better prospect of application.
同期刊论文项目
同项目期刊论文
Analysis of the smallest detectable leakage flow rate of negative pressure wave based leak detection
Signed directed graph modeling and validation of industrial processes by process knowledge and proce
Cooperative Predictive Maintenance of Repairable Systems with Dependent Failure Modes and Resource C
System Reliability Prediction Model Based on Evidential Reasoning Algorithm with Nonlinear Optimizat
Wang. A new fault detection scheme for networked control systems subject to uncertain time varying d
期刊信息
位置：