中文摘要：

对凸轮激波滚动活齿传动的参数选取及几何设计问题进行研究。分析传动比、凸轮理论半轴长度以及活齿半径等齿形参数对内齿轮齿形性质的综合影响,以内齿轮不发生齿形干涉为前提建立齿形参数之间的取值联系。根据传动原理及活齿架的结构特点,给出活齿架几何参数的计算公式,提出避免传动构件之间发生运动干涉、并满足装配要求和传动连续性的活齿架参数取值条件。基于前述分析,给出凸轮激波滚动活齿传动的几何参数设计步骤,结合示例说明此类传动装置的几何参数设计过程。示例表明,根据给出的齿形参数取值联系、活齿架参数的取值条件以及参数设计步骤可以简化凸轮激波滚动活齿传动的设计过程并得到满足要求的几何参数组合。

英文摘要：

The problems of parameter selecting selection and geometrical design of the movable rolling tooth transmission with cam actuating are studied.The comprehensive influence of tooth profile parameters,such as the transmission ratio,cam＇s theoretic cam half-axis size length,and radius of the movable rolling tooth,on tooth profile property of the inner gear is analyzed,and the value selecting selection relationship of the values ofamong tooth profile parameters is established using under the condition of no interference appearance on inner gear＇ profile.According to the transmission principle and structural characteristics analysis of the movable-tooth-frame,the calculation formulae and selecting selection conditions of the geometrical parameters of movable-tooth-frame for avoiding parts movement interference and,meeting the assembly requirement and transmission continuity are proposed.On the basis of the above analyzinganalysis,the steps for geometrical parameter design of the movable rolling tooth transmission with cam actuating are presented,and the geometrical design process of this kind of transmission equipment is illuminated illustrated by means of an example.It＇s shown that the design course of the movable rolling tooth transmission with cam actuating can be simplified,and satisfied parameter combination can be obtained by useon the basis of the value selecting selection relationship of tooth profile parameters,the selecting selection conditions of movable-tooth-frame parameters as well as the parameter design steps presented.