在这份报纸,僵硬柱体附近的一个水泡的行为作为水泡正式就职变化的位置试验性地被学习,并且有不同直径的几柱体在实验被使用。主要结果如下。僵硬柱体附近的一个水泡的行为在一个僵硬盘子附近从那是不同的。当柱体在深水里被生时,将在那里发生在水泡和柱体之间的距离增加的三种典型水泡形状。并且当柱体的直径变化,水泡形状是不同的。当柱体在免费表面附近被生时,有不同直径的柱体附近的水泡的行为是类似的。为在水泡和免费表面之间的某个距离,作为在水泡和柱体增加之间的距离,加倍喷气,使倾向的喷气并且向下,喷气将连续地发生。
In this paper, the behavior of a bubble near a rigid cylinder is studied experimentally as the positions of bubble induction change, and several cylinders with different diam- eters are used in the experiment. The main results are as follows. The behavior of a bubble near a rigid cylinder is distinct from that near a rigid plate. When the cylinders are laid in deep water, there will occur three kinds of typical bubble shapes as the distance between bubble and cylinder increases. And the bubble shapes are different as the diam- eter of cylinder varies. When the cylinders are laid near a free surface, the behaviors of bubble near cylinders with dif- ferent diameters are similar. For a certain distance between bubble and free surface, as the distance between bubble and cylinder increases, "double jet", "inclined jet" and "down- ward jet" will take place successively.