中文摘要：

以氧化石墨凝胶制备的氧化石墨烯（GO）溶胶为前驱体，在100-350℃温度下还原获得不同还原程度的还原氧化石墨烯（rGO）样品，并采用旋涂工艺制备还原氧化石墨烯气敏薄膜元件．采用X射线衍射、拉曼光谱、傅里叶变换红外光谱和气敏测试等手段研究还原温度对样品结构、官能团和气敏性能的影响．结果表明：经热还原处理的氧化石墨烯结构向较为有序的类石墨结构转变，还原温度为200℃时，样品处于GO向rGO转变的过渡阶段，还原温度达到250℃时，则表现出还原氧化石墨烯特性；无序程度随还原温度的升高先由0．85增大至1．59，随后减小至1．41，总体呈现增加趋势：氧化石墨烯表面含氧官能团随还原温度的升高逐渐热解失去，不同含氧官能团的失去温度范围不同；热还原氧化石墨烯具有优异的室温H2敏感性能，随着还原温度的升高，元件灵敏度逐渐减小，响应-恢复时间逐渐增大，最佳灵敏度为88．56％，响应时间为30s．

英文摘要：

As precursors exfoliated from graphite oxide gels, graphene oxide thin films are annealed in a temperature range of 100 ℃ to 350 ℃ to obtain a series of reduced graphene oxide samples with different reduction degrees. For the gas sensing experiments, the reduced graphene oxide thin film gas sensing element is prepared by spin coating with Ag-Pd integrated electronic device （Ag-Pd IED）. The functional groups, structures, and gas sensing performance of all the samples are investigated by X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, and gas sensing measurement. The results show that the structure of the graphene oxide samples are transformed to the graphitic structure after reduction at different thermal treatment temperatures. When the reduction temperature is lower than 150 ℃, materials exhibit features of graphite oxide. When the reduction temperature reaches about 200 ℃, the samples show characteristics transformed from graphite oxide to reduced graphite oxide gradually. When the temperature is higher than 250 ℃, materials show features of reduced graphite oxide. During the reduction process, the disorder degree increases from 0.85 to 1.59, and then decreases slightly to 1.41 with the rise of temperature. Additionally, the oxygen containing functional groups are removed with the increasing reduction temperature, and these functional groups can be removed at sPecific temperatures. In the lower temperature stage （100-200 ℃）, the first kind of oxygen containing functional group removed is the hydroxyl group （C-OH） and the epoxy group （C-O-C） is the second. In the higher temperature stage （250-350 ℃）, the main removed oxygen containing functional groups are the epoxy group （C-O-C） and the carbonyl group （C=O）. The materials treated at 150, 200, 350 ℃ exhibit n-type, ambipolar, and p-type behaviors, respectively, while rGO-200 exhibits considerable increase in resistance upon exposure to hydrogen gas. rGO-200 exhibits very small decrease o