中文摘要：

研究新型损伤容限钛合金TC21在不同的刀具磨损状态下,采用高速铣削与常规铣削的加工表面完整性,重点研究表面粗糙度、加工硬化层、金相组织等因素对表面完整性的影响。结果表明,高速铣削能够获得良好的表面质量并提高加工的效率,同时通过观察加工硬化层与金相组织可以发现,即使是刀具在严重磨损的状态下,也不会出现比较严重的加工硬化现象。

英文摘要：

Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool wear status. Results show that good surface integrity of TC21 can be obtained in high speed milling. In addition, even in acutely worn stages, there is no so-called serious hardening layer （or white layer） according to the studies on microhardness and metallurgical structure.