欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
摘要：设计了一种无线无源电容压力传感器。传感器采用MEMS工艺由硅-玻璃浆料-硅键合而成，独特的三层结构设计用以实现高温环境下的测量。应用有限元分析软件对传感器结构进行了仿真分析，并详细介绍了其加工工艺；引进了一种新型的非接触无源测量技术，用于检测传感器压敏电容极板间距的变化。测试结果表明，传感器可以实现外界压力信号与谐振频率信号之间的转化，传感器在0～200kPa压力下，谐振频率随压力变化近似成线性关系且谐振频率随压力的增大逐渐减小，灵敏度约为10．6kHz／kPa。
英文摘要：
A wireless passive capacitive pressure sensor was designed and fabricated. This sensor was proposed to operate under high temperature due to its unique silicon-glass paste-silicon sandwiched structure. The structural parameters was determinated by finite element analysis, as well as the detailed process flow was introduced. Furthermore, a non-contact passive measurement technology was presented to detect the change of the embed capacitance of the sensor in a distance. The test results show that the relation between an applied pressure signal and the shift of the resonance frequency is successfully located, the resonance frequency drops linearly as the applied pressure rises from 0 to 200 kPa with a sensitivity of 10.6 kHz/kPa approximately.
同期刊论文项目
同项目期刊论文
Measurement of wireless pressure sensors fabricated in high temperature co-fired ceramic MEMS techno
期刊信息
位置：