以设计输出电流为700mA,静态电流为50μA,芯片面积为1.5mm×2.0mm的LDO线性稳压器为目标,提出的LDO电路利用基准电路的输出直接作为芯片的输出,用基准电路所固有的跨导放大器对输出进行检测并反馈至单级放大器,放大后输出至功率管的基极,控制功率管输出额定的电压和电流。无需冗余的误差放大器,使得环路补偿极为简单,不存在传统LDO的补偿难题。在电路上把传统LDO电路所需各个模块的功能糅合到了一个较为简单的电路中,大大减小了芯片面积,并且减小了静态电流。对电路进行了仿真分析并采用2μm36V Bipolar工艺生产实现,流片后的测试结果表明该芯片实现了大电流,微功耗,小体积的特性。
A low-dropout regulator (LDO) with an output current of 700 mA, quiescent current of 50 μA and chip area of 1.5 mm×2.0 mm is proposed. The LDO circuit takes reference circuit output as its chip output. The inherent transconductance amplifier of reference circuit is used to detect the output and feedback to stage amplifier, the signal is output to the base of power transistor after amplified, which could control the power valve output rated voltage and current. The error amplifier without redundancy makes the loop-compensation extremely simple, excludes the compensation problems in traditional LDO circuit. The function of each module which traditional LDO needs is mixed into an easier circuit, thus the chip area and the quiescent current are greatly reduced. The simulation analysis of the circuit is conducted, and realized by 2 μm 36 V Bipolar technology, the tapeout result shows that the chip has the characteristic of high-current, micro-power and small size.