欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
利用高能高重复频率钕玻璃激光器对7050铝合金进行了冲击强化处理。研究了在激光介质抽运功率保持不变的情况下,通过改变放大自发辐射（ASE）的大小,激光冲击强化7050铝合金,并用X射线衍射技术测量7050铝合金表面产生的残余应力。结果表明,在保持激光介质抽运功率不变的情况下,ASE和铝合金表面产生的残余应力有一定的关系。随着ASE的增大,铝合金表面产生的残余压应力逐渐减小;当ASE增大到16.20 J时,吸收层铝箔已经被完全熔融,有效脉冲直接冲击铝合金表面,在铝合金表面产生21 MPa的拉应力,直接影响激光冲击的强化效果。
英文摘要：
The 7050 aluminum alloy is processed by laser shock processing（LSP） with high energy high repetition rate Nd∶glass laser.After LSP with the unchanged pump power and different amplified spontaneous emissions（ASE）,the surface residual stress of 7050 aluminum alloy is measured by using X-ray diffraction（XRD） technology.Results show that there is a certain relationship between ASE and the surface residual stress of aluminum alloy after LSP with unchanged pump power.With the increase of ASE,the compressive residual stress of the sample surface gradually decreases.When ASE increases to 16.20 J,the absorbing layer（aluminum foil） has been completely molten,and the effective pulse directly impactes aluminum surface and generates 21 MPa tensile residual stress which directly affects the effect of LSP on 7050 aluminum alloy.
同期刊论文项目
同项目期刊论文
Effects of multiple laser shock processing (LSP) impacts on mechanical properties and wear behaviors
Effects of laser shock processing on 00Cr12 mechanical properties in the temperature range from 25 &
Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surf
Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B magnesium all
Microstructure and wear resistance enhancement of cast steel rolls by laser surface alloying NiCr-Cr
The microstructural mechanism for mechanical property of LY2 aluminum alloy after laser shock proces
Real time NDE of laser shock processing with time-of-flight of laser induced plasma shock wave in ai
Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austeniti
Mechanical properties and residual stresses changing on 00Cr12 alloy by nanoseconds laser shock proc
Effects of processing parameters on fatigue properties of LY2 Al alloy subjected to laser shock proc
Micro-structural strengthening mechanism of multiple laser shock processing impacts on AISI 8620 ste
Simulation, analysis, and validation of the residual stresses on LY2 aluminum alloy by laser shock p
Effects of different shocked paths on fatigue property of 7050-T7451 aluminum alloy during two-sided
Comparison of the simulation and experimental fatigue crack behaviors in the nanoseconds laser shock
Effect of laser shock processing on the fatigue crack initiation and propagation of 7050-T7451 alumi
Effects of laser shock processing with different shocked paths on mechanical properties of laser wel
Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surf
Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engi
Mechanical Properties and Microstructure of Bionic Non-Smooth Stainless Steel Surface by Laser Multi
Influence of compressive stress on stress intensity factor of hole-edge crack by high strain rate la
Investigation of the stress intensity factor changing on the hole crack subject to laser shock proce
Effects of different shocked paths on fatigue property of 7050-T7451 3 aluminum alloy during two-sid
位置：