位置：成果数据库 > 期刊 > 期刊详情页
Microstructure of ultrahigh strength steel 300M fabricated by laser melting deposition
  • ISSN号：0412-1961
  • 期刊名称：金属学报
  • 时间：0
  • 页码：598-602
  • 语言：中文
  • 相关项目：材料制备加工科学与工程
作者： Wang Huaming|Li An|Dong Cui|Zhang Shuquan|
同期刊论文项目
材料制备加工科学与工程
期刊论文 78 获奖 1 专利 7
同项目期刊论文
Microstructure and mechanical properties of laser melting deposited gamma-TiAl intermetallic alloys
Microstructure and wear resistance of laser melted TiCo/Ti5Si3 dual-phase intermetallic alloy
Abnormal Grain Coarsening of Laser Surface Remelting Rapidly Solidified TA15 Titanium Alloy
Sliding Wear Properties of Dispersion-Toughened Fe9Cr9Si2-Based Ternary Metal Silicide Alloy
Microstructure and hot corrosion behaviors of a gamma-toughened Cr13Ni5Si2/Cr3Ni5Si2 ternary metal s
Hot corrosion behaviors of a Cr13Ni5Si2-based metal silicide alloy in Na2SO4+25 wt.% K2SO4 and Na2SO
Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene'4
High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composi
Effect of annealing temperature on the notch impact toughness of a laser melting deposited titanium
Deformation Behavior in High-Frequency Fatigue Failure of Laser Melting Deposited Ti-6Al-2Zr-Mo-V Al
激光沉积Ti-6Al-2Zr-Mo-V钛合金高周疲劳性能
热处理及激光多道搭接对激光熔化沉积TC18钛合金组织的影响
热处理对激光熔化沉积TA15钛合金组织及压缩性能的影响
Microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel
Wear Resistance of Ti5Si3/NiTi Biphase Intermetallic Compound Alloy by Laser Melting Deposition
Creep rupture behaviors of a laser melting deposited TiC/TA15 in situ titanium matrix composite
Microstructure and Tribological Property of Laser Melt Deposited alpha/Fe9Cr9Si2 Metal Silicide Allo
激光熔化沉积300M超高强度钢组织与力学性能
激光熔化沉积(TiB+TiC)/TA15原位钛基复合材料的显微组织与力学性能
Effect of Annealing Temperatures on Microstructure and Mechanical Properties of Laser Melting Deposi
Oxidation behavior of gamma/Mo2Ni3Si ternary metal silicide alloy
Microstructure and properties of Ti-Co-Si ternary intermetallic alloys
Microstructure and wear resistance of laser deposited Ti3Co2Si-Ti5Si3-TiCo multiphase intennetallic
Corrosion properties of a Cr13Ni5Si2-based metal silicide alloy
Effect of TiNi in dry sliding wear of laser melt deposited Ti2Ni/TiNi alloys
Microstructure and mechanical properties of directional rapidly solidified Ni-base superalloy Rene95
A wear and corrosion resistant alpha-ferrite toughened Fe9Cr9Si2 ternary intermetallic alloy
Microstructure and electrochemical characterization of laser melt-deposited Ti2Ni3Si/NiTi intermetal
Microstructure and corrosion properties of laser-melted deposited Ti2Ni3Si/NiTi intermetallic alloy
激光熔化沉积高温钛合金Ti60快速凝固组织
激光熔化沉积快速成形TA15钛合金的力学性能
Corrosion behaviors of a gamma-toughened Cr13Ni5Si2/Cr3Ni5Si2 multi-phase ternary metal silicide all
高性能航空金属结构材料及特种涂层激光熔化沉积制备与成形研究进展
Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy
CORROSION BEHAVIORS OF Ni BASE SOLID SOLUTION-TOUGHENED Cr13Ni5Si2 ALLOY IN Cl- CONTAINING SOLUTIONS
Corrosion Behavior of Ti2Ni3Si/NiTi Intermetallic Alloys in H2SO4 Solution
Microstructure and dry sliding wear resistance of CoTi intermetallic alloy
大型钛合金结构件激光直接制造的进展与挑战(邀请论文)
MoO_2和NiMo化合物性能差异的价电子结构分析
激光熔化沉积Ti-6Al-2Zr-Mo-V钛合金组织特征研究
激光熔化沉积TC2钛合金显微组织及力学性能
Effect of MoO2 on high-temperature wear resistance of a laser melting deposited gamma/NiMo alloy
Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti-Ni-Si intermetallic c
Microstructural characterization and dry sliding wear resistance of MoO2-strengthened gamma/NiMo all
Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites
Solidification microstructure and mechanical properties of corrosion-resistant ultrahigh strength st
Influence of Ni content on the microstructure and dry sliding wear properties of Cr13Ni5Si2/gamma in
High-temperature wear behaviors of a laser melted Cu-ss/(Cr5Si3-CrSi) metal silicide alloy
凝固条件对γ-Ni/MO_2Ni_3Si合金凝固组织的影响
激光熔化沉积γ/NiMo近共晶合金的组织与耐磨性
Mo基固溶体增韧Mo_2Ni_3Si金属硅化物合金高温滑动磨损性能
激光熔化沉积(TiB+TiC)/TA15显微组织
Effect of Ni content on high-temperature sliding wear properties of Cr13Ni5Si2/gamma alloy
Corrosion Behavior of laser melting-deposited gamma/MO2Ni3Si metal silicide alloy
Room-temperature dry sliding wear behavior of gamma-Ni/Mo2Ni3Si metal silicide "in situ" c
Microstructure and wear resistance of laser melted Ti5Si3-TiCo-Ti2Co multiphase intermetallic alloys
Microstructure and dry sliding wear resistance of Moss-toughened Mo2N3Si metal silicide alloys
Microstructure and wear properties of laser melted gamma-Ni/Mo2Ni3Si metal silicide "in situ&qu
High-temperature sliding wear resistance of a ductile metal-toughened Cr13Ni5Si2 ternary metal silic
退火温度对激光熔化沉积TA15钛合金组织和性能的影响
激光熔化沉积α／Fe9Cr9Si2三元金属硅化物耐磨合金组织和摩擦学性能
Abrasive wear property of laser melting/deposited Ti2Ni/TiNi intermetallic alloy
激光熔化沉积300M超高强度钢的显微组织
激光熔化沉积AerMet 100耐蚀超高强度钢的凝固组织及力学性能
激光熔化沉积Ti5Si3/NiTi双相金属间化合物合金耐磨性能
激光熔化沉积AerMet100超高强度钢凝固组织及高温稳定性
激光熔化沉积Ti-6A1-2Zr-Mo-V合金高周疲劳变形行为
激光熔化沉积（TiB＋TiC）／TAl5原位钛基复合材料的显微组织与力学性能
激光熔化沉积Ti-6Al-2Zr-Mo—V钛合金组织特征研究
TA15钛合金激光表面重熔快速凝固晶粒异常粗化
Mo基固溶体增韧Mo2Ni3Si金属硅化物合金高温滑动磨损性能
Ti2Ni3Si／NiTi金属间化合物合金在H2SO4溶液中的腐蚀行为
MoO2和NiMo化合物性能差异的价电子结构分析
镍基固溶体增韧Cr13Ni5Si2合金在含Cl^-溶液中的腐蚀行为
Microstructure and mechanical properties of laser melting deposited Ti2Ni3Si/NiTi Laves alloys
期刊信息
  • 《金属学报》
  • 中国科技核心期刊
  • 主管单位:中国科学协术协会
  • 主办单位:中国金属学会
  • 主编：柯俊
  • 地址：沈阳文化路72号
  • 邮编：110016
  • 邮箱：shxiao@imr.ac.cn
  • 电话：024-23971286
  • 国际标准刊号：ISSN：0412-1961
  • 国内统一刊号：ISSN：21-1139/TG
  • 邮发代号:2-361
  • 获奖情况:
  • 第一、二届全国优秀科技期刊评比一等奖,第一、二、三届国家期刊奖,国家期刊方阵"双高"期刊,第一、二、三届中国科学院科技期刊评比一等奖,中国科学院优秀期刊特别奖,第一、二、三、五届中国科协优秀科技期刊评比一等奖,中国科协精品期刊工程A类、B类,第一、二、三、四、五届中国百种杰出学术期刊,首届出版政府奖
  • 国内外数据库收录:
  • 俄罗斯文摘杂志,美国化学文摘（网络版）,荷兰文摘与引文数据库,美国工程索引,美国剑桥科学文摘,美国科学引文索引（扩展库）,日本日本科学技术振兴机构数据库,中国中国科技核心期刊,中国北大核心期刊（2004版）,中国北大核心期刊（2008版）,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）,中国北大核心期刊（2000版）
  • 被引量:26785