欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
Mg-Al-Zn alloy thin strips were prepared by vertical twin-roll casting.Effects of Al and Ca on the microstructure and the surface defects of the thin strips were investigated.The results show that with the increase of Al content,the quantity of surface cracks of the thin strips increases rapidly and their locations are moved to the center of the thin strips.The alloy melts with more than 0.10%Ca(mass fraction)stick on the roller and a poor surface quality of the thin strips appears.With the increase of Al content,the microstructure of the thin strips evolves from singleα-Mg phase,characterized by the uniform and equiaxed recrystallization grains, to the combination of dendriticα-Mg with Al supersaturatedα-Mg.The minor addition of Ca can obviously refine the grains of Mg-3Al-1Zn thin strip because the formation of Al2Ca and the finest grains are obtained by adding 0.08%Ca.
同期刊论文项目
同项目期刊论文
Effect of heat treatment on contact fatigue properties of n-SiO2/Ni composite coating prepared by el
期刊信息
位置：