位置：成果数据库 > 期刊 > 期刊详情页
Mo含量对TiC基金属陶瓷组织和力学性能的影响
  • ISSN号：1005-8192
  • 期刊名称：《金属功能材料》
  • 时间：0
  • 分类：TM286[电气工程—电工理论与新技术;一般工业技术—材料科学与工程]
  • 作者机构：[1]合肥工业大学材料科学与工程学院,安徽合肥230009
  • 相关基金：国家高技术研究发展计划（863计划）资助项目（2007AA03Z301）; 国家重点基础研究发展规划（973计划）资助项目（2007CB9-36001）; 国家自然科学基金资助项目（20771032）; 国家教育部“新世纪优秀人才支持计划”资助项目（NCET-04-0561）; 总装重点创新项目（7130703）
作者： 秦凯旋[1], 蒋阳[1], 陈进[1], 刘林[1], 蔚腾飞[1], 吴世强[1]
关键词： Mo, TiC金属陶瓷, 芯壳结构, 力学性能, Mo, TiC-based cermets, core-rim structure, mechanical properties
中文摘要：

采用粉末冶金工艺制备了6组不同Ni、Mo添加量的金属陶瓷材料。通过扫描电镜观察组织结构、断口形貌及裂纹扩展,用三点弯曲法测试抗弯强度,用洛氏硬度计测得试样硬度。试验结果表明,添加Mo后,TiC基金属陶瓷呈现出典型的芯壳结构,组织细化明显。当TiC含量为70%、Ni∶Mo=2∶1时,材料的抗弯强度、硬度与断裂韧性综合力学性能最好,分别为1362 MPa,92.4 HRA,14.8 MPa.m1/2。

英文摘要：

TiC-based cermets with 6 different components of Mo and Ni content were manufactured by powder metallurgy.The microstructure and fracture morphology were investigated by SEM,and the mechanical properties such as transverse strength,fracture toughness and hardness were measured.The result shows that after addition of Mo,TiC-based cermets is a typical core-rim structure and the TiC grain is refined.When the contend of TiC is 70%,Ni∶Mo=2∶1,the properties of transverse strength,hardness and fracture toughness of the material are the best： 1362 MPa,92.4HRA,14.8 MPa·m1/2.

同期刊论文项目
硫属化合物纳米结构与共轭聚合物的杂化体异质结及其光伏特性的研究
期刊论文 48
同项目期刊论文
New red phosphor (Y, Gd, Lu)BO3: Eu3+ for PDP applications
New strategy for the synthesis and characterization of monodisperse Zn7.23Cd2.77S10 nanoparticles
The energy transfer of Bi3+ &rarr Eu3+ and Bi 3+ &rarr Tb3+ in YBO3 host to produce light
Enhanced p-Type Conductivity of ZnTe Nanoribbons by Nitrogen Doping
Synthesis Spectrum Properties of High-Quality CdS Quantum Dots
Chlorine-doped n-type CdS nanowires with enhanced photoconductivity
White-light-emitting CdSe quantum dots with "magic size" via one-pot synthesis approach
Coaxial ZnSe/Si nanocables with controlled p-type shell doping
Green chemical approaches to ZnSe quantum dots: preparation, characterisation and formation mechanis
High-performance CdS:P nanoribbon field-effect transistors constructed with high-kappa dielectric an
Thermoelectric properties of rapid hot pressed polycrystalline Ag1-xPb18SbTe20 synthesized from dopi
Field Effect Properties of Phosphorus Doped CdS Single-Crystal Nanoribbon via Co-Thermal-Evaporation
Synthesis of Size- and Shape-Controlled Monodisperse PbSe Quantum Dots via a Green Approach
Synthesis and spectrum stability of high quality CdTe quantum dots capped with stearate groups in N-
Magnificent CdS three-dimensional nanostructure arrays: the synthesis of a novel nanostructure famil
Mechanism and Growth of Flexible ZnO Nanostructure Arrays in a Facile Controlled Way
A wurtz-like reaction to silicon nanowires
A greener synthetic route to monodisperse CdSe quantum dots with zinc-blende structure
Self-catalytic synthesis and photoluminescence property of cluster-like CdSiO3 nanowire arrays
Composition-controllable synthesis and optical properties of non-integral stoichiometry compound Znx
Auto-ignition route to thermoelectric oxide NaxCo2O4 powder with high compactibility
The intermediate role of Gd3+ in energy transfer to produce light under VUV excitation
Concentration and temperature dependences of YBO3 : Bi3+ luminescence under vacuum ultraviolet excit
CdS量子点的一步法合成及量子产率
Growth, evolution and photocatalytic activity of ZnO nano back-tapered arrays
The energy transfer of Bi3+ -> Eu3+ and Bi3+ -> Tb3+ in YBO3 host to produce light
Self-ignition route to Ag-doped Na1.7Co2O4 and its thermoelectric properties
New red phosphor (Y,Gd,Lu)BO_3:Eu~(3+) for PDP applications
Temperature dependence of optical properties and size tunability CdSe quantum dots via non-TOP synth
Synthesis of CdSXSe1-X nanoribbons with uniform and controllable compositions via sulfurization: Opt
Phosphine-free synthesis of CdSe quantum dots in a new Co-capping ligand system
Photoluminescence properties of Eu3+ and Bi3+ in YBO3 host under vacuum ultraviolet/ultraviolet exci
Thermoelectric properties of rapid hot-pressing N-type (Bi2Te3)0.9 (AgxBi2-xSe3)0.1 synthesized from
Self-ignition route to thermoelectric oxides of Na-doped Ca3Co4O9 and their thermoelectric propertie
Thermoelectric properties of (AgSbTe2)x (Pb0.5Sn0.5Te)1-x semiconductors prepared via rapid hot-pres
自燃法制备N型Bi掺杂LaNiO3氧化物及其热电性能研究
单壁碳纳米管随机网络场效应晶体管
自燃法制备Na掺杂Ca3Co4O9及其热电性能的研究
Ag0.8PbmSbTem＋2热电材料的快速热压法制备及性能表征
等离子平板显示器（PDP）红色荧光材料的研究进展
基于RF MEMS开关的可重构PA设计
高等规聚3-己基噻吩的合成与研究
期刊信息
  • 《金属功能材料》
  • 中国科技核心期刊
  • 主管单位:中国钢铁工业协会
  • 主办单位:中国钢研科技集团有限公司
  • 主编：赵栋梁
  • 地址：北京海淀区学院南路76号
  • 邮编：100081
  • 邮箱：MFM@chinamet.cn
  • 电话：010-62182270
  • 国际标准刊号：ISSN：1005-8192
  • 国内统一刊号：ISSN：11-3521/TG
  • 邮发代号:18-244
  • 获奖情况:
  • 中国科技论文统计源期刊,中国科技期刊综合评价数据库来源期刊,中国科学引文数据统计源期刊
  • 国内外数据库收录:
  • 美国化学文摘（网络版）,中国中国科技核心期刊
  • 被引量:3505