欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
在本文（Ⅰ）报所建立的物理模型以及解析模型的基础上，推导出振动诱导单螺杆挤出机的熔融段长度和固体床分布方程．使用低密度聚乙烯（LDPE）进行实例计算，得出：熔融速率随振动频率和振幅的增加而增加，熔膜厚度和熔融段长度随振动频率和振幅的增加而减少．当振动强度达到某一极限值后，熔融速率、熔膜厚度和熔融段长度不再随振动参数的变化而变化．最后运用剖分料筒实验验证了上述结论的正确性，理论计算值与实验结果符合得很好．
英文摘要：
With the help of physical and analytical models of melting and plasticizing described in the first report, the melting length and the solid bed distribution expressions of vibration induced single-screw extruder were presented. Low-density polyethylene （LDPE） was used in the calculation, and some conclusions were obtained. Melting rate increased, while thickness of melt film and melting length decreased with the increase of vibration frequency and amplitude. However after vibration intensity reached a limit value, melting rate, thickness of melt film and melting length would remain unchanged. In the end, the half open barrel visualization experiment was used to prove the validity of the conclusion. Calculations were in good agreement with the result of experiment.
同期刊论文项目
同项目期刊论文
Simulation of nonisothermal flow of melt during melting process of vibration-induced polymer extrude
Modeling the continuous melt transesterification of bisphenol-A and diphenyl carbonate in a continuo
Analyses of dynamic rheological behavior of polymer melt based on novel experimental equipment and p
A kinetic network model for molten low-density polyethylene in parallel superposition vibration forc
The dynamic apparent viscosity of polymer melts during pulsatile extrusion flow with vibration force
Effects of vibration force field on the interfacial interaction and morphology of polystyrene/poly(m
Synergetic Effect on PP/mEPDM Blends Under Vibration Force Field in Tri-Screw Dynamic Mixing Extrude
The Preparation of Polypropylene/Wollastonite Composites with Tri-screw Dynamic Compounding Extruder
Computer-aided experiment of using real-time small angle light scattering image processing technique
Effect of Dynamic Shear on the Microcellular Foaming of Polypropylene/High-Density Polyethylene Blen
Effect of Temperature on Foaming Behaviors of Homo- and Co-polymer Polypropylene/Polydimethylsiloxan
The Effect of Concentrations of Modifying Agent and Plasticizer on Cell Morphology of PVC Microcellu
Enhancing mechanical properties and magnetic performance of plastics magnet via mixing under vibrati
期刊信息
位置：