欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
斜齿轮存在移动载荷及空间结构复杂等因素,导致斜齿轮齿面剥落故障振动特征的提取非常困难。为了分析斜齿轮齿面剥落故障引起的振动响应特征,提出了基于切片法和势能法的斜齿轮齿面剥落故障啮合刚度的计算方法,考虑斜齿轮齿面剥落故障接触线长度的变化,分析了齿面剥落在长度和宽度两个方向扩展对时变啮合刚度的影响。同时,建立了6自由度斜齿轮系统动力学模型,获得了不同长度齿面剥落的动态响应特征及不同转速和负载对其的影响。研究结果表明,新的计算方法能够准确计算斜齿轮齿面剥落故障对啮合刚度、动态响应等特性的影响,可为齿轮系统状态监测提供依据。
英文摘要：
Due to the moving loads and complex spatial structure characteristics of helical gears,it is difficult to acquire and diagnose the vibration characteristics of the helical gear with spalling defect. To analyze the failure mechanism caused by tooth surface spalling,by considering the change of contact line length induced by the spalling defect,an analytical model is proposed to calculate the mesh stiffness of helical gear with spalling defect based on the microtomy and the potential energy method. The effects of spalling length and width on the time-varying mesh stiffness are analyzed. At the same time,a six degrees-of-freedom dynamics model of the helical gear is built,the dynamic response with different spalling length and the effects of rotational speed and load on the dynamic characteristics are obtained. The result of study shows that,the proposed new model is able to accurately calculate the mesh stiffness,dynamic response and other characteristics of the helical gears under the influence of spalling defect. The basis for the gear system status detection is provided.
同期刊论文项目
同项目期刊论文
Time-Varying Meshing Stiffness Calculation and Vibration Analysis for a 16DOF Dynamic Model With Lin
Application of an improved Levenberg-Marquardt back propagation neural network to gear fault level i
Multilevel decomposition of vibration signals from motorcycles using the wavelet-Hilbert transformat
An improved simplex-based adaptive evolutionary digital filter and its application for fault detecti
A new dynamic model for vibration analysis of a ball bearing due to a localized surface defect consi
Study on the chatter vibration of a steel plate mill based on second order cyclic autocorrelation de
Transient meshing performance of gears with different modification coefficients and helical angles u
Gearbox degradation analysis using narrowband interference cancellation under non-stationary conditi
A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis o
Vibration characteristic analysis of twenty-high rolling mill with local defect on roll surface base
Transmission of vibration and energy through layered and jointed plates subjected to shock excitatio
Prophase failure prediction of the mechanical transmission systems based on the biological evolution
Interference cancellation in space-frequency group codes cooperative OFDM communication with multipl
Impulse vibration transmissibility characteristics in the presence of localized surface defects in d
Dynamic Features of a Planetary Gear System With Tooth Crack Under Different Sizes and Inclination A
Investigation into the energy dissipation of a lap joint using the one-dimensional microslip frictio
期刊信息
位置：