位置：成果数据库 > 期刊 > 期刊详情页
馈口位置及负载对微波加热效率的影响及其优化
  • ISSN号：1005-023X
  • 期刊名称：材料导报
  • 时间：2012.4.25
  • 页码：161-163
  • 分类：TF02[冶金工程—冶金物理化学] O441.4[理学—电磁学;理学—物理]
  • 作者机构：[1]云南师范大学物理与电子信息学院昆明650092, 云南大学物理科学与技术学院,昆明650091, [2]昆明理工大学冶金与能源工程学院,昆明650093, [3]云南师范大学物理与电子信息学院,昆明650092
  • 相关基金：国家自然科学基金重点项目（50734007）
  • 相关项目：外场对钒钛组元迁移及分离的强化与协同作用
作者： 姚斌|郑勤红|彭金辉|钟汝能|李琳|向泰|YAO Bin1,2,ZHENG Qinhong1,2,PENG Jinhui3,ZHONG Run|2 College of Physical Science and Technology,Yunna|3 Faculty of Materials and Metallurgical Engineeri|
关键词： 微波加热, 馈口位置, 负载, 加热效率, 优化, microwave heating, feeds position, load, heating efficiency, optimization
中文摘要：

利用HFSS软件仿真微波腔馈口位置、馈口长度及负载厚度对微波加热效率的影响.通过数值模拟仿真获得一系列反射功率最小、可用于微波反应腔加热效率优化的理论依据；以此为基础,重新选取优化后的馈口位置及负载厚度,对垂直馈口和平行馈口两种微波反应器进行模型仿真.结果表明,优化后的加热效率分别达到了95％和91％.

英文摘要：

Based on the HFSS software, the influence to microwave heating efficiency by feeds position, loads, and length of waveguide was investigated. Some laws for the optimization of microwave heating applicator were derived by analyzing the simulation results. The applicators with perpendicular and parallel feeds were redesigned according to the laws and simulated. The simulating results show that the heating efficiencies are improved to 95% and 91 %, respectively.

同期刊论文项目
外场对钒钛组元迁移及分离的强化与协同作用
期刊论文 116 会议论文 10 专利 15
新型微波冶金高温反应器关键共性问题及应用基础研究
期刊论文 69 会议论文 17 专利 19 著作 3
同项目期刊论文
Synthesis of submicron spherical Fe–MCM-48 with actual gyroid like structure
Desilication from titanium–vanadium slag by alkaline leaching
氯化钠的吸波特性及微波干燥工艺研究
One-step synthesis of Ti-MSU and its catalytic performance on phenol hydroxylation
用FDTD法分析双脊波导的单模带宽
Effect of temperature on dielectric property and microwave heating behavior of low grade Panzhihua i
Preparation of Reduced Iron Powders from Mill Scale with Microwave Heating: Optimization Using Respo
Carbothermic reduction kinetics of ilmenite concentrates catalyzed by sodium chloride and microwave-
High-Gradient Magnetic Separation of Ultrafine Particles with Rod Matrix
A novel process for titanium sand by magnetic separation and gravity concentration
Optimizing PID controller based on genetic algorithm for industrial microwave heating device
Synthesis and Characterization of BaCO3 Nanoparticles with Different Morphologies by Microwave Homog
Thermodynamics of leaching roasted jarosite residue from zinc hydrometallurgy in NH4Cl system
An efficient 2-D FDTD method for analysis of parallel-plate dielectric resonators
Optimization of Hydrous Ferrous Sulfate Dehydration by Microwave Heating Using Response Surface Meth
Study on the transformation from NaCl-type Na<sub>2</sub>TiO<sub>3</sub> to
Synthesis and characterization of mesoporous TiO<sub>2</sub> prepared via three differen
Structural control of na(2)tio(3) in pre-treating natural rutile ore by alkali roasting for tio2 pro
Application of response surface methodology (RSM) for optimization of sintering process for the prep
Life cycle assessment of microwave tube furnace using analytic hierarchy process and fuzzy comprehen
Synthesis and Microwave Absorption Characteristics of Corundum-Mullite Refractories
微波煅烧绿矾制备铁精粉
Carbothermic reduction kinetics of ilmenite concentrates catalyzed by sodium silicate and microwave-
Catalytic combustion of chlorobenzene on the Ln modified Co/HMS
Preparation and mechanism of TiO2-coated illite composite pigments
Synthesize of Cu2O-CuO/Sr3BiO5.4 and its photocatalytic activity
Investigation on Preparation of Micro-Sized Hematite Powder from Hydrous Ferrous Sulfate Using Micro
微波焙烧高钛渣中试研究
微波加热技术在典型冶金工艺中的应用研究进展
微波复合还原剂还原钛铁矿试验
窄边对跖脊波导主模带宽研究
Evaluation of the reducing product of carbonthermal reduction of ilmenite ores
Optimization of combined microwave pretreatment–magnetic separation parameters of ilmenite using res
Microwave assisted grinding of ilmenite ore
Effect of microwave irradiation on selective heating behavior and magnetic separation characteristic
云南惠民铁矿微波磁化焙烧工艺
微波选择性加热在矿冶过程中的应用进展
Pilot-scale production of titanium-tich materials using ilmenite concentrates as raw mateials by mic
Preparation of nanosized anatase TiO<sub>2</sub>-coated illite composite pigments by Ti(
Preparation of Ti-enriched slag from V-bearing titanomagnetite by two-stage hydrochloric acid leachi
Self-adaptive PID controller of microwave drying rotary device tuning on-line by genetic algorithms
Partially Loaded Cavity Analysis by Using the 2-D FDTD Method
采用微波助磨技术处理惠民铁矿的研究
Dissociation of Ti2O3 from titania slag under mechanical activation
Optimizing conditions for wet grinding of synthetic rutile using response surface methodology
Microwave drying characteristics and kinetics of ilmenite
钛精矿碳热还原制备焊条药皮试验
Anti-caking in the production of titanium dioxide using low-grade titanium slag via the NaOH molten
A new highly efficient method for the synthesis of rutile TiO<sub>2</sub>
Investigation on phase transformation of titania slag using microwave irradiation
Application of response surface methodology for optimization of the synthesis of synthetic rutile fr
Dissociation of Ti<sub>2</sub>O<sub>3</sub> from titania slag under mechanic
Preparation of reduced iron powder using combined distribution of wood-charcoal by microwave heating
Microwave absorbing properties of mechanical activated ilmenite
Carbothermic Reduction of Panzhihua Oxidized Ilmenite in a Microwave Field
微波辅助碳热还原法制备氮化钒
A novel process for recovery of iron, titanium, and vanadium from titanomagnetite concentrates: NaOH
工艺参数对常压烧结制备莫来石晶须的影响
Leaching of refractory gold ores by microwave irradiation: comparison with conventional leaching
Kinetics of carbonthermic reduction of ilmenite concentrate using sodium chloride and sodium borate
Dielectric Properties and Microwave Heating Characteristics of Sodium Chloride at 2.45 GHz
Temperature and Moisture Dependence of the Dielectric Properties of Silica Sand
Microwave Drying of Anthracite: A Parameter Optimized by Response Surface Methodology
高温微波冶金反应器的研究现状及发展趋势
Temperature behavior of titania-rich slag under microwave heating
Optimization of combined microwave pretreatment-magnetic separation parameters of ilmenite using res
Acid-pickling plates and strips speed control system by microwave heating based on self-adaptive fuz
Dissociation behavior and structural of ilmenite ore by microwave irradiation
Efficient analysis of ridged cavity by modal FDTD method
The slabs for the rutile TiO2 （110） surface
黄铁矿包裹金的浮选试验研究
微波碳热还原钛铁矿扩试研究
Numerical modeling dynamic process of multi-feed microwave heating of industrial solution media
氢氧化锆非等温热分解动力学研究
透波材料在微波冶金领域的应用进展
碱式碳酸钴非等温热分解动力学研究
Modelling the dielectric response in heterogeneous materials using 3D RC networks
Modelling and Analysis of Ω-shaped Double Negative Material-assisted Microwave Sensor
Temperature rising characteristics of ammonium diurante in microwave fields
Kinetics of non-isothermal decomposition of basic cobalt carbonate
Microwave absorbing characteristics and temperature increasing behavior of basic cobalt carbonate in
Optimization of combined mechanical activation-roasting parameters of titania slag using response su
草酸钴在微波场中的吸波特性及升温行为研究
微波在热分解中的应用研究进展
碱式碳酸钴在微波场中的吸波特性及升温行为研究
用FDTD模拟分析高阶色散对光孤子传输的影响
Green evaluation of microwave-assisted leaching process of high titanium slag on life cycle assessme
Optimization of preparation for Co3O4 by calcination from cobalt oxalate using response surface meth
一种小型化双频天线的设计与仿真
Optimization of preparing V2O5 by calcination from ammonium metavanadate using response surface meth
Dissociation of Ti2O3 from titania slag under mechanical activation.
Optimization of processing parameters for microwave drying of selenium-rich slag using incremental i
用FDTD法分析填充介质金属同轴线的截止频率
Coupling and absorbing behavior of microwave irradiation on the Co(C2O4)·2H2O:Co3O4 system
Design of multi-bean anternas on Epsilon-Near –Zero metamateriald
微波冶金用堇青石-莫来石质耐火材料的制备及性能
Prediction model of ammonium uranyl carbonate calcination by microwave heating using incremental imp
莫来石晶须长径比影响因素的响应曲面法优化化究
用FDTD法分析各向异性介质填充矩形波导的截止特性
Prediction model of microwave calcining of ammonium diuranate calcination using incremental improved
微波煅烧重铀酸铵制备U3O8工艺研究
模糊综合评价法在管式加热炉设计方案中的应用
微波高温管式反应器的研制与应用
基于生命周期的微波高温反应器绿色性评价
微波加热技术在核工业中的应用
Study of the Optical Transmission Enhancement Properties in a One-dimensional Ag Film with Different
Microwave absorbing properties of high titanium slag under microwave irradiation
电熔氧化锆在微波场中的吸波特性和升温行为
近零材料特性及应用探讨
金属-介质壳核结构复合材料吸波特性的仿真和分析
TE波辐射下超材料正方形电磁斗篷特性分析
高温微波反应器工业化应用部分关键问题分析
TE波辐射下超材料椭圆柱电磁斗篷特性分析
Directive Emission Obtained by Mu and Epsilon-Near-Zero Metamaterials
亚波长银粒子/孔的光谐振特性研究
Simulation and Analysis of the Effective Permittivity for Two-Phase Composite Medium
Response surface methodology applied to optimize the experimental conditions for preparing synthetic
高温微波冶金反应器的研究现状及发展趋势
碱式碳酸钴非等温热分解动力学
硫酸铵微波干燥特性及动力学模型分析
玻纤工业废耐火砖中铂铑金属微波碱熔活化-水溶酸浸富集工艺
响应曲面法优化硫酸铵微波干燥工艺
辉钼精矿在微波场中的升温行为研究
Green evaluation of microwave-assisted leaching process of high titanium slag on life cycle assessment
添加纳米SiO_2对Mg-Al-Si-O系陶瓷烧结及介电性能的影响
Microwave absorbing characteristics and temperature increasing behavior of basic cobalt carbonate in microwave field
Optimization of processing parameters for microwave drying of selenium-rich slag using incremental improved back-propagation neural network and response surface methodology
Microwave absorbing properties of high titanium slag
一种具有U型调谐枝节的宽频带E型微带天线
Study of the optical transmission enhancement properties in a one-dimensional Ag film with different single slit groove structures
钛精矿的微波干燥特性及动力学
莫来石晶须长径比影响因素的响应曲面法优化
响应曲面法优化偏钒酸铵煅烧制备V_2O_5的工艺（英文）
微波煅烧重铀酸铵制备U_3O_8工艺研究
几何尺寸对非对称单脊波导单模带宽的影响
Point defect states of a hollow cylinder in two-dimensional phononic crystal
圆柱形微波加热器的建模与仿真优化
期刊信息
  • 《材料导报：纳米与新材料专辑》
  • 主管单位:重庆西南信息有限公司(原科技部西南信息中心)
  • 主办单位:重庆西南信息有限公司(原科技部西南信息中心)
  • 主编：
  • 地址：重庆市渝北区洪湖西路18号
  • 邮编：401121
  • 邮箱：matreved@163.com
  • 电话：023-67398525
  • 国际标准刊号：ISSN：1005-023X
  • 国内统一刊号：ISSN：50-1078/TB
  • 邮发代号:
  • 获奖情况:
  • 国内外数据库收录:
  • 被引量:3397