欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
文章通过有限元数值模拟分析了铜连续挤压扩展成形中温度场的分布规律。连续挤压扩展成形过程中温升主要集中在变形和摩擦剧烈的区域。整个扩展挤压过程中最高温度出现在直角弯曲区靠近挡料块的附近，可达到700℃以上。从变形和摩擦的角度分析了坯料在挤压轮径向的温度分布的特点。从变形和传热的角度分析了金属在扩展挤压区宽度和厚度方向温度分布特点，以及温度对产品成形性的影响，并进行了现场温度测试，用热电偶采集腔体密封面和扩展腔的温度，实验结果与模拟结果吻合，为铜连续挤压扩展成形性的研究提供了依据。
英文摘要：
In this paper the temperature distribution of copper extending forming of continuous extrusion was analyzed by finite element method. In the copper extending forming process, the temperature rising was mainly in the zone where the deformation and friction are fiercely. The utmost temperature was in the rectangular bending zone closing to the abutment, the temperature was up to 700℃. The radial temperature in extrusion wheel was analyzed from deformation and friction angle. The temperature of extending zone in width and thickness direction was analyzed from the deformation and heat transfer angle, and the temperature influence on extending forming was also analyzed. Then the testing temperature experiment was done. The temperature data in chamber was obtained by the thermoeouple. The testing results were consonant with the simulation results. The results provide the reference data for the analysis of extending forming.
同期刊论文项目
同项目期刊论文
The effect of free volume on the
deformation behaviour of a Zr-based
metallic glass under nanoindent
Enhancement of Plasticity and Bio-compatibility of Bulk Metallic Glass by New Composition and Micros
Enhancement of Room Temperature Ductility of Monolithic Bulk Metallic Glasses with Tailored Heteroge
Tensile plastic deformation of a Zr-based bulk metallic glass composite in the supercooled liquid re
Finite element simulation and experimental investigation of forming micro-gear with Zr-Cu-Ni-Al bulk
Deformation Behavior and Constitutive Equation for Zr55Cu30Al10Ni5 Bulk Metallic Glass in Supercoole
A Maxwell-pulse constitutive model of Zr55Cu30Al10Ni5 bulk metallic glasses in supercooled liquid re
位置：