欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
针对黄铜合金连续挤压成形过程中存在变形抗力大、成形不稳定等问题,本文应用有限元法模拟分析了H62黄铜合金连续挤压应力应变场、温度场和流动速度场分布规律。模拟结果表明,成形温度达到了铜合金再结晶温度以上,模具口处应力集中、速度差大,降低该处的成形阻力将对黄铜合金稳定成形十分有利。黄铜合金连续挤压成形实验验证了数值模拟分析结果。
英文摘要：
Aiming at the problems of large deformation resistance,instability forming etc.exist in the process of continuous extrusion for brass alloys,the stress-strain field,temperature field and flow velocity field distribution rules of the H62 brass alloy were analyzed by three-dimensional finite element method.Simulation results show that the forming temperature above the recrystallization temperature,the stress concentration is presented at die outlet position and flow velocity difference is large.Reducing the resistance in this position will be very favorable for the brass alloy stable forming.The numerical simulation analysis was verified by the continuous extrusion experiment.
同期刊论文项目
同项目期刊论文
The effect of free volume on the
deformation behaviour of a Zr-based
metallic glass under nanoindent
Enhancement of Plasticity and Bio-compatibility of Bulk Metallic Glass by New Composition and Micros
Enhancement of Room Temperature Ductility of Monolithic Bulk Metallic Glasses with Tailored Heteroge
Tensile plastic deformation of a Zr-based bulk metallic glass composite in the supercooled liquid re
Finite element simulation and experimental investigation of forming micro-gear with Zr-Cu-Ni-Al bulk
Deformation Behavior and Constitutive Equation for Zr55Cu30Al10Ni5 Bulk Metallic Glass in Supercoole
A Maxwell-pulse constitutive model of Zr55Cu30Al10Ni5 bulk metallic glasses in supercooled liquid re
位置：