欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
试件塑性变形过程伴随着机械能向热能的转化．利用红外测温法，通过分析红外热像仪采集的温度场图像，系统研究了Al-Mg合金中的Portevin-Le Chatelier（PLC）效应．在不同应变率下，实验得到了三类锯齿形应力-应变曲线，分析了相应情况下试件温度变化曲线的异同及其原因，探讨了三种类型PLC变形带的空间传播特性．研究发现，试件表面的温升随着应变率的增加而增加；PLC带的倾角转向发生在试件的两端或者带外的温度最高处．
英文摘要：
Plastic deformation is accompanied by the conversion of mechanical energy into heat. The deformation heterogeneity retated to the Portevin-Le Chatelier effect （PLC） in Al-Mg alloy during a tensile test at ambient temperature is investigated through temperature field measurement by infrared pyrometry. Under different applied strain rates, three types of stress-strain curves （types A--C） are obtained respectively. Correspondingly, the similarities and differences of temperature-strain curves are compared and interpreted qualitatively. And the spatial propagating characteristics of the three types of PLC deformation bands are observed and analyzed. The temperature rise on the surface of the specimen increases with the increase of strain rate. And the obliquity of PLC band changes either at the ends of the specimen or at the highest temperature area outside the band.
同期刊论文项目
同项目期刊论文
Influence of solute cloud and precipitates on spatiotemporal characteristics of Portevin-Le Chatelie
Fabrication of high-frequency moire gratings for microscopic deformation measurement using focused i
Study of the performance of different subpixel image correlation methods in 3D digital image correla
Viscoelastic adhesive interfacial model and experimental characterization for interfacial parameters
IDENTIFICATION OF ELASTIC-PLASTIC MECHANICAL PROPERTIES FOR BIMETALLIC SHEETS BY HYBRID-INVERSE APPR
Residual stress in thermal spray coatings measured by curvature based on 3D digital image correlatio
Vibration parameter measurement using the temporal digital hologram sequence and windowed Fourier tr
Evaluation of the quality of a speckle pattern in the digital image correlation method by mean subse
Experimental analysis for the effect of dynamic capillarity on stress transformation in porous silic
Optical readout sensitivity of deformed microreflector for uncooled infrared detector: theoretical m
Performance of an optimized substrate-free focal plane array for optical readout uncooled infrared d
Alternating-current induced thermal fatigue of gold interconnects with nanometer-scale thickness and
A three-dimensional topography measurement for micro-nano film buckling based on the focusing evalua
Investigation of loading and force sensing properties of a probe-type microforce sensor with force-d
Measurement of interfacial toughness of metal film wire and polymer membrane through electricity ind
Deformation mechanisms of carbon nanotube fibres under tensile loading by in situ Raman spectroscopy
位置：