欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
微悬臂梁传感技术是微纳传感技术研究的热点,仪器装置的研究也从单悬臂梁向微梁阵列的方向发展。本文针对间距为250μm的商品化微梁阵列,提出了一种实现对其弯曲变形的读出系统光路。利用高精度位移平台调节激光器空间位置,使光束实现微距离上平行,并分别照射在阵列梁的相邻微梁上。用位置敏感探测器对两个微悬臂梁尖端反射的激光信号进行检测,实现系统传感功能。实验验证该光路设计简单易行,针对这一方案实现了两个微梁的信号分离。在微梁上修饰对应的抗体,系统就可以对其抗原行检测。该方案对微梁多阵列传感器研制开发提出了一个新的思路。
英文摘要：
As an emerging hotspot of MEMS technology and NEMS sensor over past decades,the research of instrument style of micro-cantilever sensor was developed from single cantilever to one-dimensional or two-dimensional arrays.A new optical sequential readout for micro-cantilever array is presented in this paper,based on a commercialized micro-cantilever array with 250μm spacing.Using high precision two-dimensional optical displacement table to adjust the laser position and locate two laser beams on the adjacent micro-cantilever array tips as parallel beams on micro-distance,the bend of two micro-cantilevers was detected by PSD.Thus the system sensor function was realized.This optical path is easy put up in experiment verification and two signals from two micro-cantilevers can be better separated.When an antibody was immobilized on the surface of a micro-cantilever,the system can detect the antigen in solution.This method provided a simple way to design micro-cantilever array based on optical lever in the future.
同期刊论文项目
同项目期刊论文
Fabrication of high-frequency moire gratings for microscopic deformation measurement using focused i
Study of the performance of different subpixel image correlation methods in 3D digital image correla
Viscoelastic adhesive interfacial model and experimental characterization for interfacial parameters
IDENTIFICATION OF ELASTIC-PLASTIC MECHANICAL PROPERTIES FOR BIMETALLIC SHEETS BY HYBRID-INVERSE APPR
Residual stress in thermal spray coatings measured by curvature based on 3D digital image correlatio
Vibration parameter measurement using the temporal digital hologram sequence and windowed Fourier tr
Evaluation of the quality of a speckle pattern in the digital image correlation method by mean subse
Experimental analysis for the effect of dynamic capillarity on stress transformation in porous silic
Optical readout sensitivity of deformed microreflector for uncooled infrared detector: theoretical m
Performance of an optimized substrate-free focal plane array for optical readout uncooled infrared d
Alternating-current induced thermal fatigue of gold interconnects with nanometer-scale thickness and
A three-dimensional topography measurement for micro-nano film buckling based on the focusing evalua
Investigation of loading and force sensing properties of a probe-type microforce sensor with force-d
Measurement of interfacial toughness of metal film wire and polymer membrane through electricity ind
Deformation mechanisms of carbon nanotube fibres under tensile loading by in situ Raman spectroscopy
位置：