欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
采用硬度测试、光学显微镜、X-射线衍射、扫描电镜、透射电镜和扫描透射电镜等手段研究了晶粒组织对Al-Zn-Mg-Cu-Cr合金淬火敏感性的影响。结果表明：淬火速率从960℃/s减小至2℃/s时,均匀化及固溶后合金（H-合金）时效后的硬度下降了约33%,而挤压及固溶后合金（E-合金）时效后的硬度下降了约43%。H-合金中有粗大等轴状晶粒,E-合金中有拉长的变形晶粒及亚晶粒。慢速淬火H-合金硬度下降33%是由含Cr弥散粒子引起的;E-合金中（亚）晶界的数量增加了大约一个数量级,导致慢速淬火试样硬度的下降幅度进一步增加了10%,淬火敏感性更高。
英文摘要：
The effect of grain structure on quench sensitivity of an Al-Zn-Mg-Cu-Cr alloy was investigated by hardness testing, optical microscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy and scanning transmission electron microscopy. The results show that with the decrease of quenching rate from 960 ℃/s to 2 ℃/s, the hardness after aging is decreased by about 33% for the homogenized and solution heat treated alloy（H-alloy） with large equiaxed grains and about 43% for the extruded and solution heat treated alloy（E-alloy） with elongated grains and subgrains. Cr-containing dispersoids make contribution to about 33% decrement in hardness of the H-alloy due to slow quenching; while in the E-alloy, the amount of（sub） grain boundaries is increased by about one order of magnitude, which leads to a further 10% decrement in hardness due to slow quenching and therefore higher quench sensitivity.
同期刊论文项目
同项目期刊论文
期刊信息
位置：