位置：成果数据库 > 期刊 > 期刊详情页
退火时间对含铌高强细晶IF钢组织性能的影响
  • 期刊名称：北京科技大学学报，2010,32(8):998-1003
  • 时间：0
  • 相关项目：超纯铁素体不锈钢微合金化机理
同期刊论文项目
超纯铁素体不锈钢微合金化机理
期刊论文 101 会议论文 12
同项目期刊论文
凝固组织对超低碳铁素体不锈钢皱褶和深冲性的影响
铌钛对铁素体不锈钢析出和成形性的影响
终轧温度对铁素体不锈钢织构和成形性的影响
La对17wt%Cr铁素体不锈钢组织和性能的影响
超纯21%Cr铁素体不锈钢的热变形行为研究
Texture development and formability of strip cast 17% Cr ferritic stainless steel.
Hot deformation behavior of a new austenite-ferrite duplex stainless steel containing high content o
Precipitation of secondary phases in lean duplex stainless steel 2101 during isothermal ageing.
The correlation between yielding behavior and precipitation in ultra purified ferritic stainless ste
Microstructure, Texture and Formability of Nb+Ti Stabilized High-Purity Ferritic Stainless Steel
双辊铸轧Cr12 钢的热处理工艺对深冲性和抗皱性的影响
B对Nb微合金化的超纯Cr17铁素体不锈钢性能的影响
21%Cr铁素体不锈钢成形性能和表面起皱研究
钛、钒微合金化的超纯铁素体不锈钢屈服行为研究
高强细晶IF钢连续冷却相变的研究
薄带连铸与常规生产流程条件下Cr17铁素体不锈钢的织构及成形性能
退火工艺对高强细晶IF 钢的显微组织与性能的影响
高纯Cr17 铁素体不锈钢热轧板退火温度对冷轧退火板成形性能的影响
应用于冶金工业的电磁无损检测技术
低碳钢表面FeO层空气条件下等温转变行为的研究
热轧温度对436不锈钢热轧织构的影响
脉冲电解法制备纳米晶金属镍的摩擦性能
铌对00Cr12Ni不锈钢组织和性能的影响
Precipitates and Lüders Elongation in Ferritic Stainless Steels Stabilized with Ti and V
Nb、Ti对超纯铁素体不锈钢凝固组织及表面起皱的影响
12%Cr不锈钢焊接粗晶区组织转变和晶粒长大及析出相分析.
Characterization of intergranular corrosion in heat-affected zone of low carbon 12Cr-Ni ferritic sta
高强细晶IF钢微观形貌的研究
00Cr17Ti热带退火对冷轧薄板表面皱折的影响
热带退火对00Cr17Ti薄板成形性能的影响
铁素体不锈钢铸轧薄带凝固组织对冷轧退火带晶粒簇的影响.
热加工图对节约型双相不锈钢 2101表面裂纹的预测
等温时效对节约型双相不锈钢2101析出行为的影响
Dependence of Through-thickness Texture Evolution in Ultra Purified 17%Cr Ferritic Stainless Steels
Ti和Nb微合金化对超纯11%Cr铁素体不锈钢组织的影响
Mechanisms of Solidification Structure Improvement of Ultra Pure 17 wt% Cr Ferritic Stainless Steel
2205 双相不锈钢热变形过程中形变诱导相变的探讨
2205 双相不锈钢热轧厚向变形均匀性的实验研究
2205 双相不锈钢急冷过程中微裂纹产生机理的研究
12%Cr铁素体不锈钢焊接接头组织及韧性研究
The effect of Nb-Ti on cold rolling texture and recrystallization texture of B4003M
The Hereditary Feature for Preferred Orientation in Ferritic Stainless Steel
主应力空间等向强化数学方程与几何描述
双辊铸轧Cr12钢的热处理工艺对深冲性和抗皱性的影响
B对Nb稳定化的超纯Cr17铁素体不锈钢性能的影响
Microstructure of 12%Chromium Low Carbon Stainless Steel in High Temperature Heat-affected Zone
超纯铁素体不锈钢的组织、织构及深拉伸性能
Cr21节约型双相不锈钢的高温塑性
双相不锈钢热变形行为研究
变形速率对2205 双相不锈钢形变诱导相变的影响
Torsion Textures Simulation by Considering Rigid Body Rotation
00Cr12Ni不锈钢焊接热影响区组织及韧性研究
冷轧压下率对铁素体不锈钢深冲性能的影响
二步冷轧对铁素体不锈钢深冲性能和织构的影响
退火温度对超纯Cr17铁素体不锈钢冷轧板成形性能的影响.
精轧温度对含Nb铁素体不锈钢薄板成形性的影响
薄带连铸Cr17铁素体不锈钢的织构演变.
热轧工艺对超纯Cr17铁素体不锈钢成形性能的影响
热轧后退火对超纯铁素体不锈钢组织、织构及成形性能的影响.
热轧工艺对C r12钢表面起皱的影响机制.
超纯21%Cr铁素体不锈钢高温氧化层生长及热轧粘辊研究
变形速率对高强细晶IF钢应力应变曲线的影响
Effects of hot rolled shear bands on formability and surface ridging of an ultra purified 21%Cr ferr
2205 双相不锈钢σ 相析出规律的研究
2205 双相不锈钢中σ 相的析出规律
热轧厚规格经济性X70管线钢卷的研究
热轧工艺对409L 铁素体不锈钢深冲性的影响.
精轧温度对含铌、硼Cr17薄板成形性及表面皱折影响的研究
高纯Cr17钢板厚方向织构演变、成形性能及表面皱折
高纯Cr17铁素体不锈钢热轧板退火温度对冷轧退火板成形性能的影响.
终轧温度对超纯铁素体不锈钢组织、织构及成形性能的影响
节约型双相不锈钢2101高温变形过程中微观组织演化
Crack properties of lean duplex stainless steel 2101 in hot-forming processes.
Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Stee
Effect of Carbon Content on Microstructure and Mechanical Properties of Hot-rolled Low Carbon 12Cr-N
Study on Microstructure of Low Carbon 12% Chromium Stainless Steel in High Temperature Heat-affected
Effect of Hot Band Annealing Processes on Texture and R-Value of Ferritic Stainless Steel
Influence of Finish Rolling Temperatures on Microstructure and Texture Evolution in Ferritic Stainle
Characterization of the solidification structure and texture development of ferritic stainless steel
The sticking behavior of an ultra purified ferritic stainless steel during hot strip rolling
Effect of the solidification structure on the ridging and drawability of ultra low carbon ferritic s
17%Cr铁素体不锈钢中的第二相与织构
超低碳、氮Cr17铁素体不锈钢低温轧制工艺中织构演变
Influence of the finish rolling temperatures on the microstructure and texture evolution in the ferritic stainless steels
12％Cr铁素体不锈钢粗晶区组织转变和晶粒长大及析出相分析
Ti，Nb对17％Cr铁素体不锈钢焊接热影响区组织的影响
初始凝固组织对Cr17表面皱折的影响机制
铌与钛对铁素体不锈钢析出和成形性的影响
热加工图对节约型双相不锈钢2101表面裂纹的预测
2205双相不锈钢中σ相的析出规律
2205双相不锈钢热轧厚向变形均匀性的实验研究
2205双相不锈钢热变形过程中形变诱导相变的探讨
Effect of the solidification structure on the ridging and drawability of ultra low carbon ferritic stainless steel
Mechanisms of Solidification Structure Improvement of Ultra Pure 17 wt% Cr Ferritic Stainless Steel by Ti, Nb Addition
Rolling With Simplified Stream Function Velocity and Strain Rate Vector Inner Product