The composite films constituted of hydroxyapatite (HAP) submicron particles embedded in the gel composed of the titania nanoparticles were prepared on commercial Ti6Al4V plates with titania buffer layer obtained by a spin-coating technique. The films were annealed in air at 450 ℃, 550 ℃ and 650 ℃, respectively. The phase formation, surface morphology, andinterfacial microstructure of the films were investigated by X-ray diffraction(XRD),Fourier transform infrared spectroscopy (FT-IR), field emission-scanning electron microscopy(FE-SEM) and energy dispersive X-ray (EDS) analysis. The results show that the as-prepared films are all well-crystallized, dense,homogeneous, and there was a close interfacial bond between the film and the substrate. The results of adhesion test indicate that there is a good bonding strength between the film and the substrate. The bone-like apatite formation on the surface of the films after immersion in acellular simulatedbody fluid(SBF) validated their bioactivities.