位置：成果数据库 > 期刊 > 期刊详情页
CuW70合金真空电弧特性研究
  • ISSN号：1002-185X
  • 期刊名称：《稀有金属材料与工程》
  • 时间：0
  • 分类：TM561.2[电气工程—电器]
  • 作者机构：[1]西安理工大学,陕西西安710048
  • 相关基金：National Natural Science Foundation of China（50834003） National Natural Science Foundation of China（50871085）; National High-Tech Research and Development Program of China（2009AA03Z522）; the Foundation of Excellent Doctor Thesis of Xi＇an University of Technology
作者： 曹伟产[1], 梁淑华[1], 高壮峰[1], 王献辉[1], 杨晓红[1]
关键词： CuW70合金, 阴极斑点, 真空电弧, 组织, CuW70 alloy, cathode spot, vacuum arc, microstructures
中文摘要：

以不同粒度的W粉为原料,采用熔渗法制备CuW70合金,在真空灭弧室模拟电烧蚀实验,通过高速摄影仪和扫描电镜研究CuW70合金表面阴极斑点运动规律。研究结果表明：W粉粒度较小的CuW70合金具有较高的耐电压强度、较长的燃弧时间和低的截留值。W粉粒度较大的CuW70合金真空阴极斑点运动表现为在阳极正下方反复地重复燃烧,并且以选择Cu相击穿为主,烧蚀坑较深;W粉粒度较小的CuW70合金表面阴极斑点在阳极下方出现分裂和偏移,击穿相分布于整个阴极表面。

英文摘要：

The fine-grained and coarse-grained CuW70 alloys were prepared by sintering and infiltrating. The motion of cathode spots was observed by a digital high speed video camera and a scanning electron microscope （SEM）. The results show that the fine-grained CuW70 alloy has larger breakdown strength, longer average arc life and lower chopping current. For coarse-grained CuW70 alloy, the cathode spots ignite and extinguish alternately beneath the anode, the breakdown is mainly located on copper phase, and the erosion pits are much deeper. However, the cathode spots of fine-grained CuW70 alloys have the characteristics of division and deviation, with the uniform distribution of the erosion pits on the entire cathode surface.

同期刊论文项目
双元素活化烧结钨铜复合材料中钨骨架的机制研究
期刊论文 15
熔渗材料相控制基础及应用
期刊论文 73 会议论文 6
同项目期刊论文
活化元素对CuW材料热变形性能及组织的影响
Cu-W合金熔渗过程的微观模拟与分析
机械合金化对CrW合金烧结及电烧蚀的影响
Fe含量对钼铜合金组织和性能的影响
Diffusion barrier performance of amorphous W-Ti-N films in Cu metallization
Thermal stability of nanocrystalline W-Ti diffusion barrier thin films
Effect of Alloying Interlayer on Interfacial Bond Strength of CuW/CuCr Integral Materials
Preparation of Cu/Cr(2)O(3) Composites by Mechanical Activation and In Situ Oxidation
Effect of WC and CeO(2) on microstructure and properties of W-Cu electrical contact material
Effect of Milling Time on Electrical Breakdown Behavior of Al(2)O(3)/Cu Composite
Effect of Rare Earth Y Addition on the Properties and Precipitation Morphology of Aged Cu-Cr-Ti Lead
电弧作用下CuW触头的热冲击效应分析
添加Al_2O_3对CuW70合金阴极斑点运动特性的影响
铜钨合金在快速加热后水冷热冲击下的实验与仿真分析
Investigation on Microstructure and Properties of WCu Alloy Fabricated by Infiltrating CuLa Master A
Effect of Fe on microstructures and vacuum arc characteristics of CuCr alloys
Effect of preparation conditions on morphology and thermal stability of nanoporous copper
Preparation of Cu/Cr2O3 Composites by Mechanical Activation and In Situ Oxidation
A Study on the Nanostructured W-Ti Thin Films Deposited on Si
Preparation of copper nanoparticles by chemical reduction method using potassium borohydride
Fabrication of CuW pseudo alloy by W-CuO nanopowders
Effect of WC and CeO2 on microstructure and properties of W-Cu electrical contact material
热循环对CuW/CuCr界面强度及CuCr合金性能的影响
活化元素对CuW材料热变形性能及组织的影响
超细WCrCu30合金的电击穿特性
原位反应制备Ag/TiB2复合材料
Cu-W合金熔渗过程的微观模拟与分析
Investigation on preparation and diffusion barrier properties of W-Ti thin films
Effect of Mo addition on microstructure and vacuum arc characteristics of CuCr50 alloy
Deformability of Cu-W Composites with Addition of Cr, Ti Activated Elements
Polyhedron-aggregated multi-facet Cu(2)O homogeneous structures
The effect of Cr on the properties and sintering of W skeleton as an activated element
Vacuum Arc Characteristics of CuW70 Alloy
Diffusion behavior of W in the WCu/Ni interface
FEM simulations of tensile deformation and fracture analysis for CuW alloys at mesoscopic level
Investigation on preparation, microstructure, and properties of AgTiB2 composite
Liquid phase separation of Cu-Cr alloys during the vacuum breakdown
Sn-8.5Zn-xBi合金系与NdFeB磁体间的润湿性
机械合金化对CrW合金烧结及电烧蚀的影响
W-Ti纳米晶薄膜扩散阻挡层的热稳定性研究
靶材用钨铜复合材料的制备工艺
机械合金化W-Ti粉末的烧结特性
添加Al2O3对CuW70合金阴极斑点运动特性的影响
机械合金化对Cr-W粉末及烧结材料组织的影响
Fabrication of W-20wt.%Ti alloy by pressureless sintering at low temperature
Unique polyhedral 26-facet CuS hollow architectures decorated with nanotwinned, mesostructural and s
Fe含量对钼铜合金组织和性能的影响
Effect of Fe on vacuum breakdown properties of CuW alloys
INFLUENCE OF TEMPERATURE ON INFILTRATION PROCESS OF LIQUID COPPER IN W SKELETON
Fe元素对Cu/W间润湿行为和界面特性的影响
Preparation of W-15 wt%Ti prealloyed powders
制备方法对W-10%Ti合金组织性能的影响
Torsion angle dependence of the rectifying performance in molecular device with asymmetrical anchori
A new route for the synthesis of polyhedral gold mesocages and shape effect in single-particle surfa
低压电器用铜基触点材料的研究进展
电弧作用下CuW触头的热冲击效应分析
In situ synthesis and electrical properties of CuW-La2O3 composites
The Effect of Sintering Temperature on Mechanical and Electrical Properties of a W-10Ti Alloy Prepar
Preparation and properties of enhanced bulk nanoporous coppers
Experimental and Simulation Analysis of Thermal Shock with Rapid Heating Followed by Water Quenching
Bottom-up assembly of hierarchical Cu2O nanospheres: controllable synthesis, formation mechanism and
Analysis of meso-scale damage and crack for CuW alloys induced by thermal shock
纳米Ag—Fe合金的真空电弧特性
低温烧结纳米掺杂Ag-SnO2电接触合金放电性能研究
Nd对Al2O3f／AZ91D复合材料高温蠕变性能的影响
等离子喷涂Ag-SnO2涂层的微观结构和性能
热轧W80Cu20合金的织构演变分析
钼与石墨扩散焊接的界面反应分析
热化学共还原法制备W包覆Cu纳米复合粉体（英文）
添加Al_2O_3对CuW70合金阴极斑点运动特性的影响
铜钨合金在快速加热后水冷热冲击下的实验与仿真分析
W纤维增强高Cu含量W-Cu复合材料的研究
热旋锻法制备的钨铜线材的烧蚀性能
等离子喷涂纳米复合Ag/SnO_2电触头材料放电性能研究
原位合成Cr_2Nb/CuCr复合材料及其真空电特性
添加剂对新型AgTiB_2触头材料微结构和性能的影响
Cu／V0.97W0．03O2复合材料的组织及性能
等离子喷涂Ag／（Sn0.8La0.2）O2涂层的组织及电性能
润湿性及孔径均匀性对铜液在多孔W骨架中渗流过程的影响
期刊信息
  • 《稀有金属材料与工程》
  • 中国科技核心期刊
  • 主管单位:中国科学技术协会
  • 主办单位:中国有色金属学会 中国材料研究学会 西北有色金属研究院
  • 主编：张平祥
  • 地址：西安市51号信箱
  • 邮编：710016
  • 邮箱：RMME@c-nin.com
  • 电话：029-86231117
  • 国际标准刊号：ISSN：1002-185X
  • 国内统一刊号：ISSN：61-1154/TG
  • 邮发代号:52-172
  • 获奖情况:
  • 首届国家期刊奖,中国优秀期刊一等奖,中国有色金属工业优秀期刊1等奖
  • 国内外数据库收录:
  • 俄罗斯文摘杂志,美国化学文摘（网络版）,荷兰文摘与引文数据库,美国工程索引,美国科学引文索引（扩展库）,英国科学文摘数据库,日本日本科学技术振兴机构数据库,中国中国科技核心期刊,中国北大核心期刊（2004版）,中国北大核心期刊（2008版）,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）,中国北大核心期刊（2000版）
  • 被引量:24715