欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
应用能量色散X射线荧光分析仪对系列铅黄铜合金标样进行能谱测量，根据基本参数法原理，获取了方法中所需的质量吸收系数（μ）、激发因子（司等关键参数，编写计算程序，对标样中铜、锌含量进行了分析。结果表明，基本参数法能克服铜和锌元素间的吸收增强效应，该方法测量铅黄铜合金中铜和锌的含量范围分别为54％弗4％、33％-45％，对铜、锌的相对标准偏差（m=10）分别为0．10％、0．15％。
英文摘要：
According to fi,mdamental parameter method theory, gained the key parameters such as mass-absorption coefficients and excitation factors and wrote the calculation procedure. In experiment, a series of lead brass alloy standard samples were analyzed with an energy dispersive X-ray fluorescence spectrometer and calculated the contents of Cu, Zn of the samples via the fundamental parameter calculation procedure. The result shows the fundamental parameter method can overcome the absorption-enhancement effect between Cu and Zn elements well. The measured contents of Cu and Zn is respectively 54%-64% and 33%-45%, the precision of the method is 0.10% and 0.15 % respectively for Cu and Zn.
同期刊论文项目
同项目期刊论文
A statistical approach to fit Gaussian part of full-energy peaks from Si(PIN) and SDD X-ray spectrom
A PLS-Based Weighted Artificial Neural Network Approach for Alpha Radioactivity Prediction inside Co
A Multi-pipe and Multi-address Switching Wireless Network for Distributed Seismic Data Acquisition S
Statistical distribution based detector response function of a Si(PIN) detector for K_α and K_β X-ra
Experimental study and correction of absorption and enhancement effect between every elements of Ti,
期刊信息
位置：