东篱科研大数据发现系统（DRDS）

位置：成果数据库 > 期刊 > 期刊详情页

锂电池负极α-Fe2O3纳米粒子制备及电化学性能研究

ISSN号：1003-6660
期刊名称：《航空标准化与质量》
时间：0
分类：O643[理学—物理化学;理学—化学]
作者机构：[1]湖北第二师范学院化学与生命科学学院,武汉430205, [2]华中科技大学材料科学与工程学院,武汉430074, [3]华中科技大学机械科学与工程学院,武汉430074
相关基金：湖北省高等学校优秀中青年科技创新团队建设计划项目（T201225）;湖北第二师范学院优秀科研教师团队建设计划项目（2012K203）;湖北省教育科学“十二五”规划项目（2011B232）;湖北第二师范学院校管教学研究重点项目（2011007）;湖北第二师范学院校级化学重点学科建设计划项目（2013XZXK05）;《植物抗癌活性物质提纯与应用》湖北省重点实验室项目.

作者：华丽[1,2,3], 陈沐泽[1], 杨晨[1], 张洪权[1], 戴伟[1], 段连生[1], 曾国平[1]

关键词：锂电池, 负极α-Fe2O3, PST, PMMA, 组装制备, 电化性能, lithiumion buttery , α-Fe2O3 as anode electrode , polystyrene , poly （ methyl methacrylate ） , self-assembly preparation , electrochemical characteristics

中文摘要：

以高分子微球聚苯乙烯（PST）和聚甲基丙烯酸甲酯（PMMA）作为组装体,采用自组装方法在PST和PMMA微球表面自组装制备纳米α-Fe2O3电池负极材料,组装温度为PST（T=70℃）和PMMA（T=60℃）聚合温度.结果显示,采用PST作为组装体获得的α-Fe2O3纳米粒子颗粒更细,约70nm,粒径更均匀,分散性更好;而PMMA组装体获得的纳米粒径约80nm,分散性相对较差,主要原因是PMMA微球质地较软,易发生变形,而使α-Fe2O3纳米粒子吸附在PMMA表面不均匀,在热处理过程中受热不均导致α-Fe2O3纳米粒子尺寸不均,且有团聚趋势.XRD显示,两种组装体获得的均为纯相α-Fe2O3结构.电化学性能显示,采用PST作为组装体制备的纳米α-Fe2O3作为电池负极电化学性能明显优于PMMA组装体.

英文摘要：

α-Fe2O3 nanopatticles as an anode material for lithium ion battery were prepared by self-assembly method on the surfaces of polystyrene （PST） and poly （methyl methacrylate）（PMMA） microspheres which were regarded as self-assembly bodies, the reaction temperature were the polymerization temperature, which was 70℃ for PST synthesis, 60℃ for PMMA synthesis. The results showed that α-Fe2O3 nanoparticles were finer when PST was used as self- assembly body. The nanoparticle size was about 70 nm with good uniformity and excellent dispersion. However, the size was 80nm without excellent dispersion when PMMA was used as self-assmebly body. The main reason was that PMMA microsphers were very soft, easy to be distorted which caused to α-Fe2O3 nanoparticles absorpt and were thermo-treated disuniformly on its surfaces, also there was reuniting phenomenon. XRD analyses showed that the samples prepared by the two self-assembly methods were pure α-Fe2O3 structures. Electrochemical analyses showed that the characteristic of α-Fe2O3 structures with PST as self-assembly body was exceller than that of α-Fe2O3 nanoparticles with PMMA as self-assembly body.

同期刊论文项目