欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
通过电渣重熔制备不同硅含量的M2高速钢铸锭（硅质量分数分别为0.3%,0.8%,1.6%和2.4%）,采用光学显微镜（OM）、扫描电镜（SEM）、能谱分析（EDS）和X射线衍射（XRD）的方法研究了硅对热处理态M2高速钢中共晶碳化物的影响。研究结果表明,退火态高速钢铸锭中共晶碳化物呈连续或半连续网状分布于枝晶间,随着硅含量的增加,共晶碳化物从片层状M2C变为鱼骨状M6C。在1 165℃保温2.5h的热处理过程中,片层状M2C碳化物分解为MC和M6C碳化物,在后续变形中破碎为细小的碳化物颗粒。0.8%Si的加入减小了M2高速钢中碳化物的尺寸,而高硅含量高速钢中由于鱼骨状M6C碳化物在热处理过程中并没有发生转变,经后续变形后仍有尺寸较大对性能不利的块状碳化物。
英文摘要：
The effect of silicon on the eutectic carbides in as-heated M2 high speed steels is investigated by using optical microscope,scanning electron microscope,energy dispersive spectrometer and X-ray diffraction analysis.The high speed steel ingots with different silicon additions are produced by electroslag remelting process（the mass content of silicon is 0.3%,0.8%,1.6% and 2.4%,respectively）.The ingots are annealed at 780 ℃ for 10 h and heated at 1 165 ℃ for 2.5 h.The results show that the eutectic carbides distributed in the dendrites with continuous or semi-continuous net-shape in the as-annealed ingots.The eutectic carbides change from lamellar-like M2C to herringbone-like M6C with the increase of silicon content.After 2.5 h heating at 1 165 ℃,the lamellar-like M2C decomposes into granular M6C and MC,and the size of granules in M2 high speed steel ingot with 0.8%Si addition is smaller than that in the 0.3%Si.Whereas herringbone-like M6C is unchanged during heating treatment,and coarse primary blocky carbides which are harmful for properties still exists after the deformation.
同期刊论文项目
同项目期刊论文
Effects of yttrium addition on microstructure and mechanical properties of as-extruded AZ31 magnesiu
Effects of Sn addition on as-cast microstructure, mechanical properties and casting fluidity of ZA84
Partition of Er among the constituent phases and the yield phenomenon in a semi-continuously cast Mg
Effects of yttrium addition on microstructure and mechanical properties of extruded Mg-Zn-Y-Zr magne
Numerical and physical simulation of new SPD method combining extrusion and equal channel angular pr
Influence of stacking fault energy on formation of long period stacking ordered structures in Mg&min
Comparison of as-cast microstructures and mechanical properties for Mg-4Y-1.2Mn-0.9Sc and Mg-4Y-1.2M
Effects of minor Zr and Sr on as-cast microstructure and mechanical properties of Mg-3Ce-1.2Mn-1Zn a
Comparison about Effects of Sb, Sn and Sr on As-cast Microstructure and Mechanical Properties of AZ6
Comparison of as-cast microstructures and mechanical properties for Mg-Ce-Mn-Sc and Mg-Ce-Mn-Zn magn
Processing effects on grain refinement of AZ31 magnesium alloy treated with a commercial Al-10Sr mas
Comparison about effects of Ce, Sn and Gd additions on as-cast microstructure and mechanical propert
Effects of phase composition on the mechanical properties and damping capacities of as-extruded Mg&n
期刊信息
位置：