欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
该文对采用氨水混合工质的串联型制冷，动力复合循环进行了模拟计算分析。基础循环主要参数为：氨水工质浓度为0．3，透平进气参数为400℃／8．4MPa，热源为415℃／0．1043MPa的热空气。循环采用煳撤率、经济[火用]效率、功冷比作为评价准则。对透平进气温度、进气压力、再沸器出口工质温度、冷却水温度等关键循环参数的变化对循环热力性能的影响进行了研究，结果表明分别存在最佳透平进气温度及最佳再沸器出口工质温度使得火用效率和经济[火用]效率达到最大。此外，研究表明循环最佳基本工质浓度随冷、电价格比的变化而变化。
英文摘要：
In this paper, a simulation calculation and analysis has been conducted to the series connected ammonia-water power/refrigcration combined cycle. The main parameters of the base case cycle are chosen as followings： the ammonia mass fraction is 0.3, the turbine inlet parameters are 400℃/8.4MPa, the parameters of the heat resource air are 415℃/0.1043MPa. The exergy efficiency, the economic exergy efficiency and the power/refrigeration ratio are adopted as the evaluation indexes. A study has been carried out about the effect of some-key cycle parameters on the cycle thermal performance, the parameters include the turbine inlet temperature and pressure, the reboiler outlet temperature, the cooling water temperature. The results show that there are an optimal turbine inlet temperature and an optimal reboiler temperature existing, which separately maximizes the exergy efficiency and the economic exergy efficiency. Furthermore, it is found that the optimal basic working solution concentration varies with the price ratio of refrigeration to power.
同期刊论文项目
同项目期刊论文
位置：