欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为设计一套合理的带气膜燃气透平动叶冷却结构,采用一套设计流程对该结构进行设计,采用管网设计及三维温度场计算对比了2种不同的拓扑形式冷却结构,分析不同结构的冷却效果,并采用较优的结构进行详细设计。结果表明：对于前缘开设气膜孔的透平动叶,第二进口采用中腔进气,尾缘出气的结构比后腔进气尾缘及中腔出气效果好;采用这套设计流程能快速设计并评估冷却结构方案,并能够在设计方案的基础上进行详细的设计,达到冷却结构快速多方案设计的要求;该设计得出冷却结构最大温度1 188.15 K,平均温度1 067.10 K,冷却效率0.647。
英文摘要：
To design a reasonable cooling structure for gas turbine rotor blades with film cooling, a set of design procedure was used to complete the design of structure. Two different topologies of the cooling structures were compared by pipe-net calculation and three-dimensional temperature field calculation. The effect of different cooling structures was analysed. Then the optimum structure was used for the detailed design. The results show that for the turbine rotor blades with film cooling in the leading edge, it is better to using the middle chamber as the second inlet and the trailing edge as outlet than the rear one with the trailing edge as outlet. By using this design process, the cooling structure can be quickly designed and evaluated. Meanwhile the detail design can be conducted on this schematic design which will meet the requirements of multiple programs and rapid cooling structure design. After the process, the maximum temperature of the cooling structure is 1 188.15 K, the average temperature is 1 067.10 K, and the cooling efficiency is 0.647.
同期刊论文项目
同项目期刊论文
patial discretization error in an artificial benchmark model of oblique laser incidence by finite vo
Analysis on capabilities of density-based solvers within Open FOAM to distinguish aerothermal variab
A Second Order Radiative Transfer Equation and Its Solution by Meshless Method with Application to S
Analysis on transient conjugate heat transfer in gap–cavity–gap structure heated by high speed airfl
Numerical simulation of infrared signature emitted by liquid rocket plume using wide band k-distribu
Effect of air temperature on combustion characteristics and NOx emissions from a 0.5 MW pulverized c
Experimental study of the impact of holes-typesuction on the flow characteristics in a high-load com
First-principles molecular dynamics study on temperature-dependent dielectric function of bulk 3C an
Temperature-dependent dielectric function of germanium in the UV-vis spectral range: A first-princip
Characterization of combustion and NOx emissions with respect to over-fire air damper opening in a d
Simulation of flow behavior of particles bycluster structure-dependent drag coefficient model for ch
An effective inversion algorithm for retrieving bimodal aerosol particle size distribution from spec
Study of topology and vortex structure in turbinecascades with tip clearance under differentincidenc
Effect of the anthracite ratio of blended coals on the combustion and NOx emission characteristics o
Experimental study on the characteristics of heat transfer and flow resistance in a turbulent pipe f
Evaluation on cold modeling flow field for a down-fired 600 MWe supercritical boiler with multi-inje
Modeling of a rotational supercavitating evaporator and geometrical characteristics of supercavity i
Annaland Martin van Sint．Hans Kuipers, Dongsheng Wen, Discrete particle modeling of granular tempera
A de？ciency problem of the least squares ？nite element method for solving radiative transfer in stro
Simulation of flow behavior of particles by cluster structure-dependent drag coefficient model for c
Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MWe supercritical u
Numerical simulation of natural convection in a square enclosure filled with nanofluid using the two
Inner and Outer Secondary-Air Distance-Effect Study within a Cold Small-Scale Model of a New Down-Fi
New over-fire air arrangement and its air ratio optimization determined by aerodynamic characteristi
期刊信息
位置：