欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
通过试验和数值模拟的方法，以高负荷大弯角扩压叶栅为对象，研究了附面层抽吸孔对损失的控制作用。试验工作中，采用五孔L型探针测量叶栅出IZl截面气动参数。试验和数值模拟结果得出相似的结论，结果表明：孔式附面层抽吸可以较大幅度地提高扩压叶栅的气动性能，控制流道内的流动损失；出口截面高损失区域缩小，并向下端壁靠拢，流道中部损失减小明显，但对角区的作用并不显著；增加抽吸量对叶栅气动性能的提高并不明显，大抽吸量时反而增加了局部区域的流动损失。
英文摘要：
The detailed experiment and numerical simulation were carried out to analyze the effects of boundary layer suction hole on loss control of highly-loaded large bending angle compressor cascade suction surface. In experiment, the exit aerodynamic parameters were measured by five-hole aerodynamic probe. Experimental and numerical results come to similar conclusions. The results show that boundary layer suction can effectively improve aerodynamic performance of compressor cascade, reduce the loss of flow. High-loss area at the exit section diminishes and get close down to the end-wall. The loss decreases obviously in the region of middle blade, but not in the end-wall region. When using big-hole suction, suction volume increases at the same time may result in loss increase in the region nearly 20% blade-high from the end walls.
同期刊论文项目
同项目期刊论文
patial discretization error in an artificial benchmark model of oblique laser incidence by finite vo
Analysis on capabilities of density-based solvers within Open FOAM to distinguish aerothermal variab
A Second Order Radiative Transfer Equation and Its Solution by Meshless Method with Application to S
Analysis on transient conjugate heat transfer in gap–cavity–gap structure heated by high speed airfl
Numerical simulation of infrared signature emitted by liquid rocket plume using wide band k-distribu
Effect of air temperature on combustion characteristics and NOx emissions from a 0.5 MW pulverized c
Experimental study of the impact of holes-typesuction on the flow characteristics in a high-load com
First-principles molecular dynamics study on temperature-dependent dielectric function of bulk 3C an
Temperature-dependent dielectric function of germanium in the UV-vis spectral range: A first-princip
Characterization of combustion and NOx emissions with respect to over-fire air damper opening in a d
Simulation of flow behavior of particles bycluster structure-dependent drag coefficient model for ch
An effective inversion algorithm for retrieving bimodal aerosol particle size distribution from spec
Study of topology and vortex structure in turbinecascades with tip clearance under differentincidenc
Effect of the anthracite ratio of blended coals on the combustion and NOx emission characteristics o
Experimental study on the characteristics of heat transfer and flow resistance in a turbulent pipe f
Evaluation on cold modeling flow field for a down-fired 600 MWe supercritical boiler with multi-inje
Modeling of a rotational supercavitating evaporator and geometrical characteristics of supercavity i
Annaland Martin van Sint．Hans Kuipers, Dongsheng Wen, Discrete particle modeling of granular tempera
A de？ciency problem of the least squares ？nite element method for solving radiative transfer in stro
Simulation of flow behavior of particles by cluster structure-dependent drag coefficient model for c
Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MWe supercritical u
Numerical simulation of natural convection in a square enclosure filled with nanofluid using the two
Inner and Outer Secondary-Air Distance-Effect Study within a Cold Small-Scale Model of a New Down-Fi
New over-fire air arrangement and its air ratio optimization determined by aerodynamic characteristi
Influence of polymer additives on turbulent energy cascading in forced homogeneous isotropic turbule
Experimental Study of the Impact of Hole-type Suction on the Flow Characteristics in a High-load Com
Influence of Additional Leading-Edge Surface Roughness on Performances in Highly Loaded Compressor C
期刊信息
位置：