欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
数值研究相同条件下迷宫气封和薄叶气封结构特点、气动特性、密封机理及密封效果，比较两种气封的差异。通过与已发表的试验数据的对比，校核所采用的商业计算流体力学软件CFX的可靠性，计算得到的性能曲线与试验数据有较好的一致性，采用的数值模拟方法可行。分别对迷宫气封和薄叶气封内部流场进行数值模拟。通过对两种气封计算结果的对比分析，阐明它们的密封机理，给出各自的封严特性和所产生的摩擦转矩的变化规律。分析结果表明，薄叶气封的径向间隙远小于迷宫气封，漏气量为迷宫气封的1／3，对旋转轴产生的摩擦阻抗力矩低于迷宫气封，从结构运行特点和气动性能两方面说明薄叶气封的优越性，认为在不久的将来薄叶气封有可能替代迷宫气封。
英文摘要：
The structure feature, aerodynamic characteristics, sealing mechanisms and sealing effect of labyrinth seal and leaf seal are numerically studied under same condition, the difference of two kinds seals is compared. The reliability of commercial computational fluid dynamics computational code CFX is validated by using the experimental data from literature. The performance curves of computation has a good agreement with the experimental data, the numerical simulation method is feasible. Numerical simulation on the flow field of the labyrinth seal and leaf seal are carried out respectively by using the commercial software CFX. Through comparison analysis based on the calculation results of the two type seals, their sealing mechanisms is described, the sealing characteristics and the friction torque variation law of their own are given. The analysis results show that, the radial clearance of leaf seal is much smaller than the labyrinth seal, its leakage flow rate is about 1/3 labyrinth seal＇s, and the friction resistance torque on the rotation axis is lower than the labyrinth seal. Because of the superiority of the leaf seals in structure operation characteristics and aerodynamic performance, leaf seals may replace labyrinth seals in the near future.
同期刊论文项目
同项目期刊论文
patial discretization error in an artificial benchmark model of oblique laser incidence by finite vo
Analysis on capabilities of density-based solvers within Open FOAM to distinguish aerothermal variab
A Second Order Radiative Transfer Equation and Its Solution by Meshless Method with Application to S
Analysis on transient conjugate heat transfer in gap–cavity–gap structure heated by high speed airfl
Numerical simulation of infrared signature emitted by liquid rocket plume using wide band k-distribu
Effect of air temperature on combustion characteristics and NOx emissions from a 0.5 MW pulverized c
Experimental study of the impact of holes-typesuction on the flow characteristics in a high-load com
First-principles molecular dynamics study on temperature-dependent dielectric function of bulk 3C an
Temperature-dependent dielectric function of germanium in the UV-vis spectral range: A first-princip
Characterization of combustion and NOx emissions with respect to over-fire air damper opening in a d
Simulation of flow behavior of particles bycluster structure-dependent drag coefficient model for ch
An effective inversion algorithm for retrieving bimodal aerosol particle size distribution from spec
Study of topology and vortex structure in turbinecascades with tip clearance under differentincidenc
Effect of the anthracite ratio of blended coals on the combustion and NOx emission characteristics o
Experimental study on the characteristics of heat transfer and flow resistance in a turbulent pipe f
Evaluation on cold modeling flow field for a down-fired 600 MWe supercritical boiler with multi-inje
Modeling of a rotational supercavitating evaporator and geometrical characteristics of supercavity i
Annaland Martin van Sint．Hans Kuipers, Dongsheng Wen, Discrete particle modeling of granular tempera
A de？ciency problem of the least squares ？nite element method for solving radiative transfer in stro
Simulation of flow behavior of particles by cluster structure-dependent drag coefficient model for c
Aerodynamic characteristics within a cold small-scale model for a down-fired 350 MWe supercritical u
Numerical simulation of natural convection in a square enclosure filled with nanofluid using the two
Inner and Outer Secondary-Air Distance-Effect Study within a Cold Small-Scale Model of a New Down-Fi
New over-fire air arrangement and its air ratio optimization determined by aerodynamic characteristi
期刊信息
位置：