欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
为制备分散均匀的纳米尺度的共晶陶瓷复合粉体,采用Al（NO3）3·9H2O和Gd2O3作为原材料,通过醇-水加热法制备了纳米尺度的Al2O3/Gd AlO3共晶成分陶瓷粉体。研究了溶液初始浓度配比和pH值等对复合粉体粒径的影响。通过SEM、TEM、FT-IR和BET N2吸附法等手段表征了前驱体颗粒大小和分散性,确定最佳的前驱体制备工艺,对前驱体进行煅烧制得Al2O3/Gd AlO3复合陶瓷粉体。结果表明,前驱体粒径和分散性受制备工艺影响较大;特别是,最佳工艺制备的前驱体平均粒径20 nm,分散性良好,形貌多呈球形;1250℃煅烧后得到的Al2O3/Gd AlO3共晶陶瓷粉体的晶化良好、成分均匀,粉体粒径100~200 nm。
英文摘要：
In order to prepare nano-sized ceramic powders with eutectic composition,nano-sized Al2O3/Gd AlO3 eutectic composite ceramic powders were prepared using Al（ NO3）3·9H2O and Gd2O3 as the raw materials,through heating of alcohol-aqueous solutions. The influence of initial concentration of aqueous salt solutions and pH values on the sizes and the morphologies of the resulting particles was investigated. The best preparation process was determined by means of SEM,TEM,FT-IR,BET N2 adsorption method to characterize the precursor particle size and dispersion. These precursor powders were calcined at the temperature range from 1050 ℃ to 1250 ℃,and then the as-prepared Al2O3/Gd AlO3 composite ceramic powders were characterized. The obtained results show that the preparation process has a great influence on the particle average size and dispersion of the precursor; especially with the best preparation process,well dispersed and spherical particle can be obtained,and its average particle size reaches the 20 nm. After 1250 ℃ calcination,these resulting particles are crystallized well and have good uniformity of composition with a particle size of 100 nm to 200 nm.
同期刊论文项目
同项目期刊论文
Microstructure and mechanical properties of Si3N4/42CrMo joint brazed with TiNp modified active fill
In?uence of reactive melt in?ltration parameters on microstructure and properties of low temperature
Effect of ZrO2 content on microstructure, mechanical properties and thermal shock resistance of (ZrB
Performances of high voltage electrochemical capacitor using ball-milled graphite/Mn3O4 composite el
Preparation, characterization and infrared emissivity properties of polymer derived coating formed o
The structure and in vitro apatite formation ability of porous titanium covered bioactive microarc o
Microarc oxidized TiO2 based ceramic coatings combined with cefazolin sodium/chitosan composited dru
The effect of titanium bead diameter of porous titanium on the formation of micro-arc oxidized TiO2-
Effect of holding time on microstructure and mechanical properties of Si3N4/Si3N4 joints brazed with
Microstructure evolution of the Si3N4/Si3N4 joints brazed using Au-Ni-V filler alloys with different
Uncovering the critical factor in determining the residual stresses level in Si3N4-GM filler alloy-4
An analysis of deformation mechanism in the Si3N4-AgCuTi+SiCp-Si3N4 joints by digital image correlat
Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joi
Investigation of Si3N4 cramice/42CrMo steel joints brazed with Ag-Cu-Ti brazing alloy plus WC partic
Inhibiting Effect of Additives on Formation of ZrC Phase in ZrB2–BN Composites by Reactive Hot Press
Influence of doping with various cations on electrical conductivity of apatite-type neodymium silica
Friction and wear properties of hot-pressed NiCr-BaCr2O4 high temperature self-lubricating composite
Microstructure, thermal shock resistance and thermal emissivity of plasmas sprayed LaMAl11O19 (M = M
Influences of lattice vibration and electron transition on thermal emissivity of Nd3+ doped LaMgAl11
Preparation, structural characterization and enhanced electrical conductivity of pyrochlore-type (Sm
Microstructural features and properties of the nano-crystalline SiC/BN(C) composite ceramic prepared
Influence of sintering parameters on microstructure and electrical conductivity of La10Si6O27 cerami
Influence of calcination temperature on synthesis and photoluminescence properties of Eu3+?-doped La
Fabrication of a new SiC/2024Al co-continuous composite with lamellar microstructure and high mechan
Growth of YbVO4 crystals evolved from hot corrosion reactions of Yb2Zr2O7 against V2O5 and Na2SO4+V2
Hollow graphene spheres self-assembled from graphene oxide sheets by a one-step hydrothermal process
Effects of Ar ion irradiation on the diffusion bonding joints of Zr55Cu30Ni5Al10 bulk metallic glass
Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using h
Joint properties between carbon nanotube and gold at different energy levels from molecular dynamics
Effects of alloying elements in GH99 superalloy on microstructure evolution of reactive brazing TiAl
Microstructural features and properties of nano-crystalline SiC/BN(C) composite ceramic prepared fro
Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 com
Effect of Starting PMMA Content on Microstructure and Properties of Gel Casting BN/Si3N4 Ceramics wi
Influence of trivalent Gd and Dy codoping on the structure and electrical conductivity of pyrochlore
Friction and wear characteristics of BaCr2O4 ceramics at elevated temperatures in sliding against si
The effect of co-doping with MgO and Yb2O3 on the structure and electrical conductivity of the Sm2Zr
Microstructure and mechanical properties of diffusion bonded single crystal to polycrystalline Ni-ba
Microstructure and Mechanical Properties of ZrC-W Matrix Composite Prepared by Reactive Infiltration
Thermo-optical properties of LaMAl11O19 (M = Mg, Mn, Fe) hexaaluminates for high-temperature thermal
Preparation, structure and electrical conductivity of pyrochlore-type Gd1–xEu2xSm1–xZr2O7 ceramics w
Friction and wear properties of reactive hot-pressed TiB2-TiN composites in sliding against Al2O3 ba
Preparation, structure and electrical conductivity of the pyrochlore-type phase Sm2Zr2O7 codoped wit
Microstructure and mechanical properties of zirconia-toughened lithium disilicate glasseceramic comp
Effect of brazing conditions on microstructure and mechanical properties of Al2O3/Ti-6Al-4V alloy jo
Microstructure and mechanical properties of an Si3N4/Si3N4 joint brazed with Au-Ni-Pd-V filler alloy
Molecular dynamics simulation of the effect of surface roughness and pore on linear friction welding
In Vitro Cell Uptake of Biocompatible Magnetite/Chitosan Nanoparticles with High Magnetization: A Si
A metasilicate-based ceramic coating formed on magnesium alloy by microarc oxidation and its corrosi
Microarc oxidation of 2024 Al alloy using spraying polar and its influence on microstructure and cor
Crystallization and microstructural evolution process from mechanically alloyed amorphous SiBCN powd
Effect of in situ synthesized TiB whisker on microstructure and mechanical properties of carbon&ndas
Effects of Pore size on Microstructure, Mechanical and Dielectric Properties of Gel Casting BN/Si3N4
Microstructural evolution and growth behavior of in situ TiB whisker array in ZrB2-SiC/Ti6Al4V brazi
In?uence of brick pattern interface structure on mechanical properties of continuous carbon ?ber rei
Study on hot corrosion reactions between SmYbZr2O7 ceramic and vanadium pentoxide at temperatures of
First-principles calculations of water dissociation on the oxygen-deficient (010) surface in Ferguso
An elevated temperature infrared emissivity ceramic coating formed on 2024 aluminium alloy by microa
期刊信息
位置：