位置：成果数据库 > 期刊 > 期刊详情页
TiAl合金与镍基高温合金的扩散连接
  • ISSN号：0253-360X
  • 期刊名称：焊接学报
  • 时间：2012
  • 页码：17-20+113-114
  • 分类：TG457[金属学及工艺—焊接]
  • 作者机构：[1]哈尔滨工业大学先进焊接与连接国家重点实验室,哈尔滨150001, [2]哈尔滨工业大学化工学院,哈尔滨150001, [3]绍兴市天龙锡材有限公司,绍兴312001
  • 相关基金：国家自然科学基金资助项目（50975062,51105107,51021002）; 黑龙江省自然科学基金资助项目（QC2011C044）; 中国国家博士后基金资助项目（AUGA4130902510）; 中央高校基本科研业务费专项资金资助项目（HIT.BRETI.2010006,HIT.NSRIF.2010119,HIT.NSRIF.201135）
  • 相关项目：原位自生反应复合钎焊连接陶瓷/金属的方法及机理研究
作者： 何鹏|李海新|林铁松|黄玉东|刘羽|钱国统|
关键词： 钛铝合金, 镍基高温合金, 扩散连接, 界面结构
中文摘要：

采用钛为中间层,对TiAl合金与镍基高温合金（GH99）进了扩散连接.研究了扩散连接接头的界面结构和连接温度对界面结构及连接性能的影响,并对连接界面反应层的形成机制进行探讨.结果表明,GH99/Ti/TiAl的界面结构为：GH99/（Ni,Cr）ss/富Ti-（Ni,Cr）ss/TiNi/Ti2Ni/α-Ti＋Ti2Ni/Ti（Al）ss/TiAl＋Ti3Al/TiAl;随着连接温度的升高,各反应层厚度增加,接头的抗剪强度先增加后减小;在连接温度1 173 K,连接时间30 min,连接压力20 MPa时,抗剪强度最高为260.7 MPa.

同期刊论文项目
原位自生反应复合钎焊连接陶瓷/金属的方法及机理研究
期刊论文 52 会议论文 4 获奖 2 专利 2
　1：250000区域地球化学勘查规范
期刊论文 126
形成金属间化合物颗粒增强钎缝的钛铝基合金连接方法及其机理研究
期刊论文 46 会议论文 1 专利 14 著作 2
多功能防热陶瓷基复合材料研究
期刊论文 209 专利 54
同项目期刊论文
Brazing of Al2O3 to Ti-6Al-4V alloy with in situ synthesized TiB-whisker-reinforced active brazing a
Interfacial reaction evolution of the ZrC ceramic joint diffusion bonded with Ni interlayer
Interfacial Microstructure and Properties of In-situ TiB Reinforced ZrB2-SiC Joints
TiAl/Ni基合金反应钎焊接头的微观组织及剪切强度(英文)
TiAl基合金与Ni基合金钎焊连接接头界面组织及性能
Microstructure evolution of Al2O3/Al2O3 joint brazed with Ag-Cu-Ti + B + TiH2 composite filler
工艺参数对Al_2O_3/TC4合金接头界面组织及力学性能的影响
Microstructure and mechanical properties of ZrB<sub>2</sub>–SiC joints fabricated by a c
Ti-Ni钎料钎焊连接ZrC-SiC复合陶瓷接头的界面组织
Al<sub>2</sub>O<sub>3</sub>/Cu-Sn-Ti+B钎料/Ti-6Al-4V合金连接的微观结构及力学性能
TiB_w/TC4钛合金与C/C复合材料钎焊接头的界面组织结构
Al2O3/TC4 合金钎焊接头中 TiB 晶须对接头组织结构及力学性能的影响
Effect of in situ synthesized TiB whisker on microstructure and mechanical properties of carbon-carb
Al_2O_3/Cu-Sn-Ti+B钎料/Ti-6Al-4V合金连接的微观结构及力学性能
Cu+B复合钎料配比对Al_2O_3/TC4合金钎焊接头界面组织的影响
Al<sub>2</sub>O<sub>3</sub>/TC4合金钎焊接头中TiB晶须对接头组织结构及力学性能的影响
连接工艺参数对镍基高温合金TLP连接接头组织和性能的影响(英文)
GH99合金液相扩散连接界面组织分析
保温时间对TiAl合金与镍基合金扩散连接界面组织结构及连接强度的影响
Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes
纳米尺度连接技术的研究现状与展望
用复合中间层扩散连接钛铝基合金与镍基合金
TiAl／Ti／Nb／GH99扩散连接接头的界面组织结构及接头强度
工艺参数对Al2O3／TC4合金接头界面组织及力学性能的影响
SiC陶瓷及其复合材料连接的研究现状
Cu＋B复合钎料配比对Al2O3／TC4合金钎焊接头界面组织的影响
非晶态镍基钎料箔润湿成缝特征及其对钎焊接头形态的影响
TiAl/Ti/GH99扩散连接接头应力的数值模拟
Sn—Zn合金在Si3N4／2024Al复合材料表面渗锡行为
水轮机叶片热喷涂技术研究现状及展望
电子封装与组装中的软钎焊技术发展及展望
非晶合金连接的进展现状
论电子商务环境中企业财务管理的对策
TiAl/Ni基合金反应钎焊接头的微观组织及剪切强度(英文)
TiAl基合金与Ni基合金钎焊连接接头界面组织及性能
TiB_w/TC4钛合金与C/C复合材料钎焊接头的界面组织结构
Al_2O_3/Cu-Sn-Ti+B钎料/Ti-6Al-4V合金连接的微观结构及力学性能
连接工艺参数对镍基高温合金TLP连接接头组织和性能的影响(英文)
Microstructure and mechanical properties of Si3N4/42CrMo joint brazed with TiNp modified active fill
Effect of SiC content on mechanical properties and thermal shock resistance of BN–ZrO2–S
In?uence of reactive melt in?ltration parameters on microstructure and properties of low temperature
Effect of ZrO2 content on microstructure, mechanical properties and thermal shock resistance of (ZrB
Synthesis route and mechanical properties of reactive hot pressed TiN-TiB2 ceramics.
Influence of Composition on Self-toughening and Oxidation Properties of Y-α-Sialons.
Influence of Composition on Self-toughening and Oxidation Properties of Y-α-Sialons
Preparation, structure and electrical conductivity of pyrochlore-type samarium–lanthanum zirco
Improvement of mechanical properties of Sn−58Bi alloy with multi-walled carbon nanotubes
Ionic conductivity of oxy-apatite La10Si6-xInxO27-δ solid electrolyte ceramics
High voltage asymmetric supercapacitor based on MnO2 and graphene electrodes.
Performances of high voltage electrochemical capacitor using ball-milled graphite/Mn3O4 composite el
Preparation, characterization and infrared emissivity properties of polymer derived coating formed o
The structure and in vitro apatite formation ability of porous titanium covered bioactive microarc o
Microarc oxidized TiO2 based ceramic coatings combined with cefazolin sodium/chitosan composited dru
The effect of titanium bead diameter of porous titanium on the formation of micro-arc oxidized TiO2-
The effect of oxidation time on the micro-arc titanium dioxide surface coating containing Si,Ca and
Effect of holding time on microstructure and mechanical properties of Si3N4/Si3N4 joints brazed with
Microstructure evolution of the Si3N4/Si3N4 joints brazed using Au-Ni-V filler alloys with different
Uncovering the critical factor in determining the residual stresses level in Si3N4-GM filler alloy-4
An analysis of deformation mechanism in the Si3N4-AgCuTi+SiCp-Si3N4 joints by digital image correlat
Microstructure and strength of Si3N4 joints bonded with sialon-oxinitride glass.
Effect of joining temperature and holding time on microstructure and shear strength of Ti2AlC/Cu joi
Investigation of Si3N4 cramice/42CrMo steel joints brazed with Ag-Cu-Ti brazing alloy plus WC partic
原位形成氧氮玻璃中间层连接Si3N4陶瓷
Effect of brazing temperature on microstructure and mechanical properties of grapgine/copper joint.
用Ag-Cu-Ti+Mo复合钎料钎焊Si3N4陶瓷
Influence of ZrC content on the elevated temperature tensile properties of ZrCp/W composites
Inhibiting Effect of Additives on Formation of ZrC Phase in ZrB2–BN Composites by Reactive Hot Press
Carbon microtube/Fe3O4 nanocomposite with improved wave-absorbing performance
First-principles investigation of ammonia borane for hydrogen storage
Synthesis of nitrogen-doped carbon microtubes for application in lithium batteries
Preparation of SiCN(O) material with vinyl trichlorosilicane
Influence of doping with various cations on electrical conductivity of apatite-type neodymium silica
Electrical conductivity and chemical stability of BaCe0.8–xAxGd0.2O3–δ (A = In, Zr, Ta; x = 0, 0.1)
Friction and wear properties of hot-pressed NiCr-BaCr2O4 high temperature self-lubricating composite
Microstructure, thermal shock resistance and thermal emissivity of plasmas sprayed LaMAl11O19 (M = M
Enhanced sinterability and electrical properties of GdSmZr2O7 by addition of nickel oxide.
Influences of temperature and atmosphere on thermal stability of BaCrO4.
Influences of lattice vibration and electron transition on thermal emissivity of Nd3+ doped LaMgAl11
Synthesis and photoluminescence properties of Eu3+?-doped Gd2Zr2O7
Preparation, structural characterization and enhanced electrical conductivity of pyrochlore-type (Sm
Physical and surface characteristics of the mechanically alloyed SiBCN powder.
Microstructural features and properties of the nano-crystalline SiC/BN(C) composite ceramic prepared
Formation of Concentric Multilayers in a Chitosan Hydrogel Inspired by Liesegang Ring Phenomena
Magnetic Hydrogels and Their Potential Biomedical Applications.
Influence of sintering parameters on microstructure and electrical conductivity of La10Si6O27 cerami
Preparation and characterization of LnMgAl11O19 (Ln = La, Nd, Gd) ceramic powders.
Sintering and electrical conductivity of the GdSmZr2O7 ceramic with and without ZnO sintering aid.
Hot corrosion behavior of neodymium magnesium hexaaluminate by vanadium pentoxide in air
Influence of calcination temperature on synthesis and photoluminescence properties of Eu3+?-doped La
A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength
Fabrication of a new SiC/2024Al co-continuous composite with lamellar microstructure and high mechan
Development of elongated 6H-SiC grains in reaction-bonded porous SiC ceramics
Densification of tantalum carbide ceramics with 5 mol.% Al, Cu, Ag and Au
Structure and electrical conductivity of BaCe0.85Ln0.15O3–δ (Ln = Gd, Y, Yb) ceramics.
Growth of YbVO4 crystals evolved from hot corrosion reactions of Yb2Zr2O7 against V2O5 and Na2SO4+V2
Domain structures in hot-press sintered SrBi2Ta1.6Nb0.4O9 and SrBi2Ta2O9
Hollow graphene spheres self-assembled from graphene oxide sheets by a one-step hydrothermal process
Dependence of infrared radiation on microstructure of polymer derived ceramic coating on steel.
Microstructure and shear strength of the reactive brazing joints of TiAl/Ni-based alloy
Improving the strength of brazed joints with in situ synthesized TiB whiskers
Cu+TiB2 composite filler for brazing Al2O3 and Ti-6Al-4V alloy
In situ synthesis of TiB whisker reinforcements in the joints of Al2O3/TC4 during brazing
Microstructure evolution of Al2O3/Al2O3 joint brazed with Ag-Cu-Ti+B+TiH2 composite filler
Brazing of Al2O3 to Ti–6Al–4V alloy with in situ synthesized TiB-whisker-reinforced acti
Sn-Zn合金在Si3N4/2024Al材料表面渗Sn行为研究
工艺参数对过渡液相扩散连接TiAl 基合金界面组织及接头强度的影响
用复合中间层扩散连接TiAl基合金与Ni基合金
工艺参数对Al2O3/TC4接头界面组织及力学性能的影响.
Cu+B复合钎料配比对Al2O3/TC4合金钎焊接头界面组织的影响.
GH99 合金液相扩散连接界面组织分析
保温时间对TiAl与Ni基合金扩散连接界面组织结构及连接强度的影响
Al2O3/Cu-Sn-Ti+B钎料/Ti-6Al-4V 合金连接的微观结构及力学性能
TiBw/TC4 钛合金与C/C复合材料钎焊接头的界面组织结构
Influence of residual stress on magnetoelectric coupling of bilayered CoFe2O4/PMN-PT thin films.
ol-gel synthesis of Bi3.25La0.75Ti3O12 nanotubes
Effects of Ar ion irradiation on the diffusion bonding joints of Zr55Cu30Ni5Al10 bulk metallic glass
Effect of hydrogen on diffusion bonding of TiAl-based intermetallics and Ni-based superalloy using h
Microstructure evolution and its effect on the mechanical properties of the ZrC-SiC composite joint
Interfacial Structure and Shear Strength of Brazing Joints of TiAl/Ni-based Alloy
Molecular dynamics simulation of linear friction welding between dissimilar Ti-based alloys
Morphology Characterization of Multi-Walled Carbon Nanotubes in Sn–58Bi/CNTs Composites
Microstructure and Properties of the Diffusion Bonding ZrB2-SiC/Nb Joint
Joint properties between carbon nanotube and gold at different energy levels from molecular dynamics
Microstructure evolution and mechanical properties of transient liquid phase (TLP) bonded joints of
Effects of alloying elements in GH99 superalloy on microstructure evolution of reactive brazing TiAl
Effect of Preforming Process and Starting Fused SiO2 Particle Size on Microstructure and Mechanical
Microstructural features and properties of nano-crystalline SiC/BN(C) composite ceramic prepared fro
Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 com
Microstructure and integrity of leucite ceramic derived from potassium-based geopolymer precursor
Mechanical and dielectric properties of gelcasted Si3N4 porous ceramic using CaHPO4 as an additive
Mechanical and thermal physical properties of amorphous SiCN(O) ceramic bulks prepared by hot-press
Oxidation of ZrC-30vol% SiC composite in air from low to ultrahigh temperature
Effect of solid contents on the mechanical properties of SiC-10 wt.%AlN ceramic composites prepared
Mechanical properties and plasma erosion resistance of BNp/Al2O3-SiO2 composite ceramics
Effect of Starting PMMA Content on Microstructure and Properties of Gel Casting BN/Si3N4 Ceramics wi
Influence of trivalent Gd and Dy codoping on the structure and electrical conductivity of pyrochlore
Preparation and high temperature oxidation resistance of microarc oxidation ceramic coatings formed
Friction and wear characteristics of BaCr2O4 ceramics at elevated temperatures in sliding against si
Effect of Ce substitution for Zr on electrical property of fluorite-type Gd2Zr2O7.
Electrical conductivity improvement of Nd2Ce2O7 ceramic co-doped with Gd2O3 and ZrO2.
The effect of co-doping with MgO and Yb2O3 on the structure and electrical conductivity of the Sm2Zr
Order-disorder transformation and enhanced oxide-ionic conductivity of (Sm1–xDyx)2Zr2O7 ceramics
Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2–
Microstructure and mechanical properties of active brazed SiO2–BN ceramic modified by electron
Interlayer design to control interfacial microstructure and improve mechanical properties of active
Correlation between microstructure and mechanical properties of active brazed Invar/SiO2–BN jo
Interfacial microstructure and strengthening mechanism of BN-doped metal brazed Ti/SiO2-BN joints
Microstructure and mechanical properties of diffusion bonded single crystal to polycrystalline Ni-ba
Low temperature diffusion bonding of pure aluminum
Microstructure and Mechanical Properties of ZrC-W Matrix Composite Prepared by Reactive Infiltration
烧结温度对W-10Ti显微组织和硬度的影响.
Preparation of BaCrO4 particles in the presence of EDTA from aqueous solutions.
Synthesis and electrical conductivity of La10Si5.5B0.5O27+δ (B = In, Si, Sn, Nb) ceramics.
Influence of magnesia doping on structure and electrical conductivity of pyrochlore-type GdSmZr2O7.
Synthesis, structure and electrical conductivity of BaZr1–xDyxO3–δ ceramics
Synthesis, structure and electrical properties of rare-earth doped apatite-type lanthanum silicates
Hot corrosion of (Sm1–xYbx)2Zr2O7 (x = 0, 0.5, 1.0) ceramics against V2O5 molten salt in air at 800
Thermo-optical properties of LaMAl11O19 (M = Mg, Mn, Fe) hexaaluminates for high-temperature thermal
Preparation, structure and electrical conductivity of pyrochlore-type Gd1–xEu2xSm1–xZr2O7 ceramics w
Electrodeposition and tribological properties of self-lubricating Ni–BaCr2O4 composite coatings
Friction and wear properties of reactive hot-pressed TiB2-TiN composites in sliding against Al2O3 ba
Preparation, structure and electrical conductivity of the pyrochlore-type phase Sm2Zr2O7 codoped wit
Thermo-optical properties of LaMg1–xNixAl11O19 (0 ≤ x ≤ 1.0) hexaaluminates for metallic
Microstructure and mechanical properties of zirconia-toughened lithium disilicate glasseceramic comp
Electrical conductivity of 5 mol.% Yb2O3 and 5 mol.% Gd2O3 co-doped Sm2Zr2O7
Effect of brazing conditions on microstructure and mechanical properties of Al2O3/Ti-6Al-4V alloy jo
ZrC-W复合材料的无压反应浸渗制备工艺研究
Hot corrosion of V2O5-coated NdMgAl11O19 ceramic in air at 950 oC
Microstructure and mechanical properties of an Si3N4/Si3N4 joint brazed with Au-Ni-Pd-V filler alloy
Effect of sintering pressure on the texture of hot-press sintered hexagonal boron nitride composite
Preparation and thermophysical properties of LaMgAl11O19–Yb3Al5O12 ceramic composites.
Effect of bonding parameters on microstructures and properties during TLP bonding of Ni-based alloy
Molecular dynamics simulation of the effect of surface roughness and pore on linear friction welding
In Vitro Cell Uptake of Biocompatible Magnetite/Chitosan Nanoparticles with High Magnetization: A Si
A metasilicate-based ceramic coating formed on magnesium alloy by microarc oxidation and its corrosi
Microarc oxidation of 2024 Al alloy using spraying polar and its influence on microstructure and cor
Crystallization and microstructural evolution process from mechanically alloyed amorphous SiBCN powd
Structure and electrical conductivity of BaCe0.7In0.1A0.2O3–δ (A = Gd, Y) ceramics.
Effect of in situ synthesized TiB whisker on microstructure and mechanical properties of carbon&ndas
纳米结构多层膜自蔓延连接技术的研究及其应用.
Effects of Pore size on Microstructure, Mechanical and Dielectric Properties of Gel Casting BN/Si3N4
Microstructure and integrity of leucite ceramic derived from potassium-based geopolymer precursor.
Microstructural evolution and growth behavior of in situ TiB whisker array in ZrB2-SiC/Ti6Al4V brazi
Interfacial Structure and Properties of Reactive Brazing Joints of TiAl/Ni-based Alloy
Diffusion bonding of ZrB2-SiC/Nb with in situ synthesized TiB whiskers array
Dense sub-micron-sized ZrC-W composite produced by reactive melt infiltration at 1200 oC.
含碳纳米管的Sn-58Bi钎料的制备及其钎焊性研究
In?uence of brick pattern interface structure on mechanical properties of continuous carbon ?ber rei
Study on hot corrosion reactions between SmYbZr2O7 ceramic and vanadium pentoxide at temperatures of
Microstructure and tribological properties of reactive hot pressed TiN-TiB2 composites incorporated
Ti-Ni钎料钎焊连接 ZrC-SiC 复合陶瓷接头的界面组织
First-principles calculations of water dissociation on the oxygen-deficient (010) surface in Ferguso
TiAl 合金与镍基高温合金的扩散连接
An elevated temperature infrared emissivity ceramic coating formed on 2024 aluminium alloy by microa
Ball-milled graphite as an electrode material for high voltage supercapacitor in neutral aqueous ele
Physical and surface characteristics of the mechanically alloyed SiBCN powder
Electrical properties of the GdSmZr2O7 ceramic under different sintering conditions
Diffusion bonding of ZrB2-SiC and Nb using dynamic compressed Ni foam interlayer
Ternary Phase ZrxCuyCz in Reactively Infiltrated ZrC/W Composite.
薄带连铸用侧封板材料的研究进展
ZrC—SiC复合陶瓷扩散焊接头界面组织及力学性能
Ti-Ni钎料钎焊连接ZrC—SiC复合陶瓷接头的界面组织
Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes
纳米尺度连接技术的研究现状与展望
用复合中间层扩散连接钛铝基合金与镍基合金
工艺参数对Al2O3／TC4合金接头界面组织及力学性能的影响
SiC陶瓷及其复合材料连接的研究现状
Cu＋B复合钎料配比对Al2O3／TC4合金钎焊接头界面组织的影响
非晶态镍基钎料箔润湿成缝特征及其对钎焊接头形态的影响
TiAl/Ti/GH99扩散连接接头应力的数值模拟
水轮机叶片热喷涂技术研究现状及展望
电子封装与组装中的软钎焊技术发展及展望
非晶合金连接的进展现状
Ag-Cu-Sn-Ti活性钎焊Gr/2024Al复合材料与TC4钛合金
DD3高温合金与Ti3AlC2陶瓷的真空钎焊
Cu-25Sn-10Ti活性钎焊SiO2f／SiO2复合材料与Invar合金
含碳纳米管的Sn-58Bi钎料的制备及其钎焊性
采用Ag-Cu-Ti＋Mo复合钎料钎焊Si3N4陶瓷
纳米Al_2O_3/GdAlO_3共晶陶瓷复合粉体的醇-水加热法制备与表征
先驱体法制备非晶态SiCNO材料
纳米结构多层膜自蔓延连接技术的研究及其应用
Cuf/铝硅酸盐聚合物复合材料的制备和力学性能
漂珠尺寸对35%漂珠/铝硅酸盐聚合物复合材料组织结构与性能的影响
微弧氧化生物活性TiO2基纳米结构表面磷灰石诱导能力与药物上载及释放
AlN添加量对BN基复合陶瓷物相组成、微观结构及力学性能的影响
Mechanical properties and plasma erosion resistance of BNp/Al2O3-SiO2 composite ceramics
AlN添加量对BN基复合陶瓷热学性能与抗热震性的影响
TiAl与Ni基合金接触反应钎焊接头界面组织及性能
Cr含量对（TiBw＋TiCp）／（Ti-4．0Fe-7．3Mo-xCr）复合材料组织及性能的影响
TiAl/Ni基合金反应钎焊接头的微观组织及剪切强度(英文)
TiAl基合金与Ni基合金钎焊连接接头界面组织及性能
Al_2O_3/Cu-Sn-Ti+B钎料/Ti-6Al-4V合金连接的微观结构及力学性能
连接工艺参数对镍基高温合金TLP连接接头组织和性能的影响(英文)
Development of Interface Reaction Layer between TiAl Alloy and 42CrMo Brazing Joints and Its Effect
GH99合金液相扩散连接界面组织分析
保温时间对TiAl合金与镍基合金扩散连接界面组织结构及连接强度的影响
Al2O3/Cu-Sn-Ti+B钎料/Ti-6Al-4V合金连接的微观结构及力学性能
Microstructural evolution and mechanical properties of the joint of TiAl alloys and C/SiC composites
Effects of hydrogen on diffusion bonding of TiAl-based intermetallics using hydrogenated Ti6Al4V int
凝固方式对Sn-Bi钎料组织和性能的影响
合金元素对Sn-57Bi无铅钎料组织及韧性的影响
Cu + TiB2 composite filler for brazing Al2O3 and Ti-6Al-4V alloy
Effect of bonding parameters on microstructures and properties during TLP bonding of Ni-based super
Microstructural investigation of in situ TiB whiskers array reinforced ZrB2-SiC joint
Al2O3/TC4合金钎焊接头中TiB晶须对接头组织结构及力学性能的影响
Microstructure and shear strength of reactive brazing joints of TiAl/Ni-based alloy
ZrC—SiC复合陶瓷扩散焊接头界面组织及力学性能
Ti-Ni钎料钎焊连接ZrC—SiC复合陶瓷接头的界面组织
纳米尺度连接技术的研究现状与展望
用复合中间层扩散连接钛铝基合金与镍基合金
TiAl／Ti／Nb／GH99扩散连接接头的界面组织结构及接头强度
工艺参数对Al2O3／TC4合金接头界面组织及力学性能的影响
Cu＋B复合钎料配比对Al2O3／TC4合金钎焊接头界面组织的影响
TiAl/Ti/GH99扩散连接接头应力的数值模拟
水轮机叶片热喷涂技术研究现状及展望
非晶合金连接的进展现状
生成相性质及其对TiAl合金／42CrMo钢钎焊接头力学性能影响
控制气氛下的AgCuTi/TiAl润湿铺展动力学
中国有色金属焊接材料的发展现状及展望
形成金属间化合物颗粒增强焊缝的TiAl与钢钎焊机理及工艺
温度对AgCu/光滑TC4体系润湿铺展动力学的影响
论电子商务环境中企业财务管理的对策
铜镍硅锌镁合金的时效析出动力学
TiB_w/TC4钛合金与C/C复合材料钎焊接头的界面组织结构
Al_2O_3/Cu-Sn-Ti+B钎料/Ti-6Al-4V合金连接的微观结构及力学性能
数控机床热误差补偿高次多阶ADL模型应用分析
GH99合金液相扩散连接界面组织分析
保温时间对TiAl合金与镍基合金扩散连接界面组织结构及连接强度的影响
液化气体储罐爆沸过程的影响因素
杉木无性系测定林磷素利用效率的比较
Novel immunological and nutritional-based prognosticindex for gastric cancer
Improvement of mechanical properties of Sn-58Bi alloy with multi-walled carbon nanotubes
基于AHP方法的德惠市土地资源利用评估分析
用复合中间层扩散连接钛铝基合金与镍基合金
TiAl／Ti／Nb／GH99扩散连接接头的界面组织结构及接头强度
工艺参数对Al2O3／TC4合金接头界面组织及力学性能的影响
Cu＋B复合钎料配比对Al2O3／TC4合金钎焊接头界面组织的影响
TiAl/Ti/GH99扩散连接接头应力的数值模拟
含碳纳米管的Sn-58Bi钎料的制备及其钎焊性
纳米结构多层膜自蔓延连接技术的研究及其应用
中国有色金属焊接材料的发展现状及展望
原发性干燥综合征伴肺间质损害患者血清中白细胞介素-17水平及其临床意义的研究’
CD4＋CD25＋T细胞对小鼠破骨细胞形成及功能的影响
绝经后女性类风湿关节炎患者骨密度与生化免疫指标相关性的研究
飞秒激光微加工中热熔化与热传递现象研究
陕西省土地利用变化和社会经济发展的关系研究
应用实测光谱估算千岛湖夏季叶绿素a浓度
血清神经营养因子在皮肌炎伴间质性肺病中的临床意义
原发性干燥综合征伴间质性肺病患者血清基质金属蛋白酶-7水平及其意义的研究
狼疮脑病患者脑脊液白细胞介素6、肿瘤坏死因子α水平及其临床意义
系统性红斑狼疮患者尿N-乙酰-β-氨基葡萄糖苷酶水平及其临床意义的研究
基于时间序列法与马尔可夫链的多沙水库动态运用研究
新型乳化剂DNS-330对VeoVa10／VAc乳液性能的影响研究
测井技术在奥陶系洞穴型岩溶储层识别中的应用
新疆积雪覆盖时空变异分析
ASL-D6眼动仪刺激呈现与数据收集的功能扩展研究
大学生团队学习模式
基于E-PRIME的眼动实验刺激呈现
高职院校财务管理评价体系及其应用——以宝鸡职业技术学院为例
生草养鸡对梨园土壤养分含量的影响
高职经管类专业工学结合教学模式探讨
钙拮抗剂尼莫地平对映体在Chiralcel OJ柱上的拆分机理
VAc—VeoVa10乳胶粉对改性水泥砂浆力学性能的影响
论电子商务环境中企业财务管理的对策
云南红梨优质丰产栽培技术
TiAl与Ni基合金接触反应钎焊接头界面组织及性能
略论契丹后族族帐的演变
新安江水库（千岛湖）热力学状况及热力分层研究
中医药联合靶向治疗晚期非小细胞肺癌的研究进展
土壤氡测量技术在新疆塔什库尔干县地热资源勘查中的应用
辽朝后族萧姓由来述论
PKF118—310对白血病K562细胞凋亡的影响及其机制
肺感方对肺部多重耐药菌体外抑菌作用的研究
以地方立法项目探索法律诊所教学模式
完善法学实验教学质量监控体系的探索
四种植物精油对花斑皮蠹的熏蒸作用
基于能值理论的榆林市耕地可持续利用评价
衡水市学校体育资源社会化制约因素分析
党组织领导下高校人才队伍建设的研究
电涡流传感器误差修正技术研究
贵州省马铃薯加工产业的现状、问题及其发展对策
中文电子图书系统使用实证研究——以大连海洋大学图书馆为例
建设中国电子票据交易中心的路径选择
岳阳市君山区乡村旅游发展探析
从大学社会构成的变化看近代早期英国社会结构变迁
防氟钙剂防治枣黑顶病的研究
基于语料库的地震报道英语研究
远程教育传播过程中的互动研究
后危机时代扩大农村消费对策研究——以廊坊为例
西方学者关于都铎时期英国人文主义研究的新趋势
依托遵义文化 打造特色馆藏
响应面法优选银杏果中异黄酮提取工艺研究
巴陵全鱼席的历史现状与未来发展
兰开斯特王朝时期英国民族意识的觉醒--以汉弗莱公爵为个案的考察
读图时代分层视觉传播过程探析
辽朝后族萧翰身世考
基于MPLS技术的虚拟专用网路径故障恢复分析
SB-431542对树突状细胞融合疫苗的制备和抗小鼠胰腺癌效应的影响
基于云计算的IPv4／IPv6虚拟机在线迁移框架
移动IPv4/IPv6虚拟机迁移系统设计
千岛湖溶解氧的动态分布特征及其影响因素分析
一株产紫杉醇内生真菌液体发酵工艺的优化
内生真菌产紫杉醇研究的回顾与展望
HACCP在马铃薯净菜生产中的应用
云计算IPv4／IPv6虚拟机在线迁移系统设计
肺复康方治疗中晚期非小细胞肺癌32例
广西木论国家级自然保护区细痣疣螈栖息地环境的调查分析
基于移动IPv4/IPv6演进云计算框架设计
山西枣黑顶病致病因素分析
肺感方体外抗菌活性的实验研究
绿海龟α-actin基因的cDNA克隆与序列分析
肺淋巴瘤样肉芽肿病1例报告
青防肿痛外敷散局部组织药动学研究
浅谈构建与规范中国法务会计诉讼支持的制度体系
类风湿关节炎患者血清骨形态发生蛋白7的水平及临床意义
结缔组织生长因子对类风湿关节炎成纤维样滑膜细胞增殖的影响
CTGF siRNA对类风湿关节炎成纤维样滑膜细胞凋亡的影响
上海建设电子票据交易中心的路径选择
益气养阴、清热解毒散结法治疗中晚期非小细胞肺癌40例临床研究
辽朝后族萧挞凛身世考
近50年新疆北疆地区气候变化趋势分析研究
信息熵理论在多媒体课件图形设计中的应用
脑得生分散片处方优选及体外释放度评价
厄贝沙坦联合吡格列酮对糖尿病肾病尿VEGF水平的影响
优质厚皮甜瓜设施栽培关键技术
对遵义市地方文献建设的思考
苏霍姆林斯基的劳动教育思想对当前我国农村职业教育的启示
国内外知识治理研究综述
社区护理干预在绝经后骨质疏松症患者治疗中的作用
“健康是1,其他是0”：体能是青少年全面发展的基础
网络、信任和规范对知识创造的影响：知识共享的中介作用
政府管理视角下的安顺蜡染知识产权保护
地震硬新闻英语主位推进模式研究
对体育院校运动康复与健康专业“医用生物化学”课程建设的思考
生态文明推进过程中民众的三个认识误区
对独立学院学生管理工作创新思维的思考
关于辽长寿公主和延寿公主的几个问题
乌鲁木齐晚发型母乳性黄疸患儿近期神经发育情况分析
成人Still病患者外周血白细胞介素-17水平及其临床意义
贸易融资链中的票据池创新方案研究
健康教育对绝经后骨质疏松症患者生存质量的影响
高职经管类会计专业工学结合教学模式研究
期刊信息
  • 《焊接学报》
  • 北大核心期刊（2011版）
  • 主管单位:中国科学技术协会
  • 主办单位:中国机械工程学会 中国机械工程深地焊接学会 哈尔滨焊接研究所
  • 主编：王亚
  • 地址：哈尔滨市松北区创新路2077号
  • 邮编：150028
  • 邮箱：hjxbbjb@126.com
  • 电话：0451-86323218
  • 国际标准刊号：ISSN：0253-360X
  • 国内统一刊号：ISSN：23-1178/TG
  • 邮发代号:14-17
  • 获奖情况:
  • 1990年获机械电子工业部年度优秀科技期刊二等奖,1992年获中国科学技术协会优秀学术期刊三等奖
  • 国内外数据库收录:
  • 美国化学文摘（网络版）,荷兰文摘与引文数据库,美国工程索引,日本日本科学技术振兴机构数据库,中国中国科技核心期刊,中国北大核心期刊（2004版）,中国北大核心期刊（2008版）,中国北大核心期刊（2011版）,中国北大核心期刊（2014版）,中国北大核心期刊（2000版）
  • 被引量:15422