欢迎您！东篱公司
退出
-
申报数据库
-
立项数据库
-
成果数据库
-
项目获奖数据库
中文摘要：
以研究甘蔗断尾断面质量及切割功耗为目的，采用试验方法，研究了进给速度、刀盘转速、刀盘悬伸长度对断面质量及切割功耗的影响。应用综合评分法处理实验结果，得出较优参数组合，即刀盘转速为900r／min，进给速度为0．488m／s，刀片悬伸为60mm。通过方差分析得知，刀盘转速对试验结果影响高度显著。同时，探讨了3种不同圆盘切割器的断尾效果，得出工具钢刀片的断尾质量最好且功耗最小的结论。
英文摘要：
In order to study the section quality of cane - end and cutting power consumption, the effect of speed of feed, cutter - disk speed of rotation, cutter - disk overhung length on the section quality and cutting power consumption were discussed with a experimental method. Taken Syntheses method of marks to process the experimental result, arriving at the relatively excellent combination parameter：cutterdisk speed of rotation is 900 r/min, speed of feed is 0. 488m/s, cutter - blade overhung quantity is 60mm. By the analysis of variance, learning that cutter - disk speed of rotation has highly significant influence on test result. At the same time, researching the cutting effect of three different of disk cutter -bar, gotten out the consequence that the dock quality of tool steel cutter - blade might as well, power consumption least.
同期刊论文项目
同项目期刊论文
期刊信息
位置：